Swelling and radiation creep of austenitic corrosion-resistant steel irradiated by neutrons in wide dose and temperature ranges

被引:0
|
作者
S. I. Porollo
S. V. Shulepin
A. A. Ivanov
Yu. V. Konobeev
N. I. Budylkin
E. G. Mironova
机构
来源
Atomic Energy | 2011年 / 110卷
关键词
Austenitic Stainless Steel; Tangential Stress; Fuel Element; Fuel Assembly; Irradiation Temperature;
D O I
暂无
中图分类号
学科分类号
摘要
The results of a study of the swelling and in-reactor creep of EI-847, EP-172, and ChS-68 austenitic steel after irradiation in materials science assemblies in the range 330–700°C and damaging dose 20–96 dpa are presented. The temperature dependences of the volume change of steel were obtained from measurements of the diameter of unloaded ampuls. It is shown that the swelling of the steel increases linearly with increasing tangential stress. The modulus of in-reactor creep in the interval 410–630°C for the steel investigated in the cold-deformed state varies in the range (0.5–3)·10–6 MPa–1·dpa–1. For lower and higher temperatures, the creep modulus increases to (5–8)·10–6 MPa–1·dpa–1.
引用
收藏
页码:248 / 258
页数:10
相关论文
共 50 条
  • [1] SWELLING AND RADIATION CREEP OF AUSTENITIC CORROSION-RESISTANT STEEL IRRADIATED BY NEUTRONS IN WIDE DOSE AND TEMPERATURE RANGES
    Porollo, S. I.
    Shulepin, S. V.
    Ivanov, A. A.
    Konobeev, Yu. V.
    Budylkin, N. I.
    Mironova, E. G.
    ATOMIC ENERGY, 2011, 110 (04) : 248 - 258
  • [2] CORROSION-RESISTANT AUSTENITIC STEEL WITH NITRIDE STRENGTHENING
    KOSITSINA, II
    SAGARADZE, VV
    KHAKIMOVA, ON
    FILIPPOV, YI
    FIZIKA METALLOV I METALLOVEDENIE, 1991, (07): : 179 - 183
  • [3] Swelling and Radiation Creep of Ferrite-Martensite Steel Irradiated in the Bn-350 Reactor in a Wide Range of Temperature and Damaging Dose
    S. I. Porollo
    Yu. V. Konobeev
    A. A. Ivanov
    S. V. Shulepin
    M. V. Leont’eva-Smirnova
    N. S. Nikolaeva
    Atomic Energy, 2016, 120 : 189 - 198
  • [4] Swelling and Radiation Creep of Ferrite-Martensite Steel Irradiated in the Bn-350 Reactor in a Wide Range of Temperature and Damaging Dose
    Porollo, S. I.
    Konobeev, Yu V.
    Ivanov, A. A.
    Shulepin, S. V.
    Leont'eva-Smirnova, M. V.
    Nikolaeva, N. S.
    ATOMIC ENERGY, 2016, 120 (03) : 189 - 198
  • [5] Prevention of Corrosion-Resistant Austenitic Steel Cladding Layer Surface Defects
    Amezhnov, A. V.
    Rodionova, I. G.
    Zaitsev, A. I.
    Shaposhnikov, N. G.
    Pavlov, A. A.
    Baklanova, O. N.
    METALLURGIST, 2016, 59 (9-10) : 923 - 930
  • [6] FEATURES OF THE STRUCTURE WITH STATIC STRAIN AGING OF AN AUSTENITIC CORROSION-RESISTANT STEEL
    DERIPASKO, VT
    OPARINA, NA
    METAL SCIENCE AND HEAT TREATMENT, 1988, 30 (7-8) : 529 - 531
  • [7] Effect of hot working on corrosion-resistant austenitic stainless steel.
    Kodjaspirov, GE
    Vol, AA
    EUROMAT 97 - PROCEEDINGS OF THE 5TH EUROPEAN CONFERENCE ON ADVANCED MATERIALS AND PROCESSES AND APPLICATIONS: MATERIALS, FUNCTIONALITY & DESIGN, VOL 1: METALS AND COMPOSITES, 1997, : 673 - 676
  • [8] Development of high-strength corrosion-resistant austenitic TWIP steel
    Mujica, L.
    Weber, S.
    Theisen, W.
    METALLURGIA ITALIANA, 2011, (06): : 31 - 35
  • [9] Prevention of Corrosion-Resistant Austenitic Steel Cladding Layer Surface Defects
    A. V. Amezhnov
    I. G. Rodionova
    A. I. Zaitsev
    N. G. Shaposhnikov
    A. A. Pavlov
    O. N. Baklanova
    Metallurgist, 2016, 59 : 923 - 930
  • [10] Cyclic Strength of an Austenitic Corrosion-Resistant Steel with a High Nitrogen Content
    Terent'ev, V. F.
    Bannykh, I. O.
    Blinov, E. V.
    Prutskov, M. E.
    Kolmakov, A. G.
    Blinov, V. M.
    RUSSIAN METALLURGY, 2010, 2010 (04): : 346 - 353