Study of nanostructure of experimental Ti–5Al–4V–2Zr alloy

被引：3

作者：

Rogozhkin S.V. ^{[1
,3
]}

Schastlivaya I.A. ^{[2
]}

Leonov V.P. ^{[2
]}

Nikitin A.A. ^{[1
,3
]}

Orlov N.N. ^{[1
]}

Kozodaev M.A. ^{[1
,3
]}

Vasiliev A.L. ^{[4
]}

Orekhov A.S. ^{[4
]}

机构：

[1] Institute for Theoretical and Experimental Physics named by A.I. Alikhanov of National Research Centre “Kurchatov Institute,”, Moscow

[2] National Research Center Kurchatov Institute—Central Research Institute of Structural Materials Prometey, St. Petersburg

[3] National Research Nuclear University MEPhI, Moscow

[4] National Research Center Kurchatov Institute, Moscow

来源：

Inorganic Materials: Applied Research | 2017年 / 8卷 / 6期

关键词：

chemical composition; nanosized pre-precipitates; phase composition; radiation damage; radiation dose; titanium alloy;

D O I：

10.1134/S2075113317060119

中图分类号：

学科分类号：

摘要：

The microstructure and chemical composition of phases and inclusions in Ti–5Al–4V–2Zr alloys are studied in the initial state, after irradiation by titanium ions to radiation damage dose of ~1 dpa at 260°C, and after thermal aging at 450°C for 1000 h. Microstructural studies are carried out using scanning electron microscopy and atom probe tomography. Phase analysis is performed using energy dispersive X-ray spectroscopy. Chemical analysis of grains of the matrix phase and β-phase is presented. Spatial distribution of chemical elements in α- and β-phase lamellae is analyzed by atom probe tomography. Formation of nanosized vanadium pre-precipitates in the α-phase is observed in irradiated material. © 2017, Pleiades Publishing, Ltd.

引用

页码：848 / 860

页数：12

共 50 条

[21] Numerical simulation and experimental investigation of laser joining Ti6Al4V alloy and CFRTP with embedded Ti6Al4V alloy [J].

Xu, Ying ;

Bu, Hengchang ;

Wang, Feiyun ;

Ma, Wanping ;

Zhan, Xiaohong .

OPTICS AND LASER TECHNOLOGY, 2022, 156

[22] Numerical simulation and experimental investigation of laser joining Ti6Al4V alloy and CFRTP with embedded Ti6Al4V alloy [J].

Xu, Ying ;

Bu, Hengchang ;

Wang, Feiyun ;

Ma, Wanping ;

Zhan, Xiaohong .

OPTICS AND LASER TECHNOLOGY, 2022, 156

[23] Study on the microstructure and grinding resistance of nanocrystalline Ti-4Al-2V alloy [J].

Zhang Xiyan ;

Jia Chong ;

Liu Zhinong ;

Yi Jin .

RARE METAL MATERIALS AND ENGINEERING, 2006, 35 :178-180

[24] Thermal effects of continuous laser treatment on Ti-6 Al(wt%)-4V(wt%) titanium alloy [J].

Velasquez, J. D. Puerta ;

Lavisse, L. ;

Kneip, J. C. ;

Andrzejewski, H. ;

Chevrier, P. ;

Bolle, B. ;

Tidu, A. ;

Mattei, S. .

HIGH TEMPERATURE CORROSION AND PROTECTION OF MATERIALS 7, PTS 1 AND 2, 2008, 595-598 :1033-1038

[25] STUDY ON CONSTITUTIVE RELATIONSHIP OF Ti-5Al-2Sn-2Zr-4Cr-4Mo ALLOY AND SIMULATION OF HOT FORMING PROCESSES [J].

X Q Zhang ;

Y H Peng ;

M Q Li and X Y Ruan Department of Plasticity Technology Shanghai Jiao TOng University Shanghai School of Material Science and Engineering Northwestern Polytechnical University Xi an China .

ActaMetallurgicaSinica(EnglishLetters), 2000, (01) :342-348

[26] Structure and Properties of Alloy Ti–6Al–4V Samples Fabricated by 3D Printing [J].