Effect of Stringer Design on the Stability of Stiffened Composite Panel Under In-plane Shear: An Experimental Study

被引：0
作者：
Yuequan Wang
Shuhua Zhu
机构：
[1] Nanjing University of Aeronautics and Astronautics,College of Materials Science and Technology
[2] Nanjing University of Aeronautics and Astronautics,College of Aerospace Engineering
来源：
International Journal of Aeronautical and Space Sciences | 2021年 / 22卷
关键词：
Stiffened composite panel; In-plane shear; Buckling; Post-buckling; Stability; Experiments;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The safe exploitation of the buckling and post-bulking region of stiffened composite panels is of prime interest in aerospace engineering. Experiments were carried out to investigate the effects of stringer design on the buckling and post-buckling behavior of stiffened composite panels subjected to in-plane shear loading in this study. Three configurations of I-shape stringers were designed with the same skin in the stiffened composite panels. The shear loading was applied through a customized picture-frame rig which is loaded by a mechanical test machine. Ten specimens in total were manufactured and tested to obtain the buckling loads and the final failure loads, respectively. The experimental results show that the stringer design has much more influence on the buckling load than the final failure load of the stiffened composite panel.
引用
收藏
页码：590 / 601
页数：11
相关论文
共 87 条
[1]  
Degenhardt R(2014)Future structural stability design for composite space and airframe structures Thin Wall Struct 81 29-38
[2]  
Castro SGP(2000)Postbuckling behaviour of a blade-stiffened composite panel loaded in uniaxial compression Comp Part A Appl Sci Manuf 31 459-468
[3]  
Arbelo MA(2019)Experimental and finite element numerical studies on the post-buckling behavior of composite stiffened panels Mech Adv Mater Struct 42 1645-1664
[4]  
Zimmerman R(2004)A numerical and experimental investigation on composite stiffened panels into post-buckling Thin Walled Struct 28 2501-2509
[5]  
Khakimova R(2009)Buckling and post-buckling behavior of compression loaded composite panels with hat stiffeners J Reinf Plast Compos 84 285-293
[6]  
Kling A(2016)Experiment and optimization of the hat-stringer-stiffened composite panels under axial compression Compos B Eng 123 150-160
[7]  
Falzon BG(2015)Experiment and analysis of hat-stringer-stiffened composite curved panels under axial compression Compos Struct 94 3421-3433
[8]  
Stevens KA(2012)Post-buckling behaviour of flat stiffened composite panels: experiments vs. analysis Compos Struct 120 334-345
[9]  
Davies GO(2015)Effect of the stiffener stiffness on the buckling and post-buckling behavior of stiffened composite panels—experimental investigation Compos Struct 120 31-39
[10]  
Masood SN(2019)Experimental study on compressive buckling behavior of J-stiffened composite panels Opt Lasers Eng 166 96-103
123456789