Facile fabrication of polystyrene/halloysite nanotube microspheres with core–shell structure via Pickering suspension polymerization

In this article, a facile method for fabrication of core–shell nanocomposite microspheres with polystyrene (PS) as the core and halloysite nanotubes (HNTs) as the shell via Pickering suspension polymerization was introduced. Stable Pickering emulsions of styrene in water were prepared using HNTs without any modification as a particulate emulsifier. The size of the Pickering emulsions varied from 195.7 to 26.7 μm with the water phase volume fraction increasing from 33.3 to 90.9 %. The resulting Pickering emulsions with the water phase volume fraction of above 66.7 % were easily polymerized in situ at 70 °C without stirring. HNTs played an important role during polymerization and effectively acted as building blocks for creating organic–inorganic nanocomposite microspheres after polymerization. The sizes of PS/HNTs microspheres were roughly in accord with that of the corresponding emulsion droplets before polymerization. The effect of the water phase volume fraction on the stability of Pickering emulsions and the morphologies of nanocomposite microspheres was investigated by optical microscopy, confocal laser scanning microscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy and so on.