Effect of tool angle on cutting force and residual stress in the oblique cutting of TC21 alloy

被引：0
作者：
Xu Zhang
Hongbing Wu
机构：
[1] Shanghai University of Engineering Science,College of Mechanical Engineering
[2] Zhejiang University,College of Mechanical and Energy Engineering, Ningbo Institute of Technology
来源：
The International Journal of Advanced Manufacturing Technology | 2018年 / 98卷
关键词：
Titanium alloy; Tool angle; Oblique model, cutting force; Residual stress; Simulation;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
As one new type alloy, titanium alloy TC21 is difficult to cut. To investigate the machinability, the oblique cutting process for TC21 alloy has been investigated deeply. In the study, one 3D finite element model (FEM) of oblique cutting was presented to simulate the oblique turning process of TC21 alloy. In the oblique cutting simulation of TC21 alloy, Johnson-Cook material law has been adopted. Through the simulation, stress, and temperature, residual stress distribution and cutting force in the oblique cutting of TC21 alloy was obtained. At the same time, the effect of tool angle on the cutting force and residual stress in the oblique cutting of TC21 alloy has been analyzed detailedly. In addition, the simulation results have been verified by the oblique cutting tests and the residual stress tests.
引用
收藏
页码：791 / 797
页数：6
相关论文
共 50 条
[41]   Investigation on the relationship among tool wear, cutting force and vibration in milling of TC4 [J].
Jiang, Zhen-Xi ;
Sun, Jie ;
Li, Guo-Chao ;
Jia, Xing-Min ;
Li, Jian-Feng .
Binggong Xuebao/Acta Armamentarii, 2015, 36 (01) :144-150
[42]   Study on Residual Stress for High-speed Cutting Titanium Alloy Based on Finite Element Method [J].
Wang, M. H. ;
Liu, Z. H. ;
Wang, H. J. .
HIGH SPEED MACHINING, 2011, 188 :216-219
[43]   Effect of cutting speed on residual stress of special coating during remanufacturing [J].
孙椰望 ;
张甲英 ;
张之敬 ;
徐滨士 .
JournalofBeijingInstituteofTechnology, 2015, 24 (02) :194-200
[44]   Effect of cutting speed on residual stress of special coating during remanufacturing [J].
Sun, Ye-Wang ;
Zhang, Jia-Ying ;
Zhang, Zhi-Jing ;
Xu, Bin-Shi .
Journal of Beijing Institute of Technology (English Edition), 2015, 24 (02) :194-200
[45]   Prediction of surface residual stress after end milling based on cutting force and temperature [J].
Ma, Yuan ;
Feng, Pingfa ;
Zhang, Jianfu ;
Wu, Zhijun ;
Yu, Dingwen .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2016, 235 :41-48
[46]   Effect of cold deformation and heat treatment on microstructure and mechanical properties of TC21 Ti alloy [J].
Elshaer, Ramadan N. ;
Ibrahim, Khaled M. .
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2020, 30 (05) :1290-1299
[47]   Finite Element Simulation of Residual Stress on the Surface in the Cutting Considering Tool Flank Wear [J].
Liu, Haitao ;
Sun, Yazhou ;
Lu, Zesheng .
MACHINING AND ADVANCED MANUFACTURING TECHNOLOGY X, 2010, 431-432 :338-341
[48]   Effect of Basketweave Microstructure on Very High Cycle Fatigue Behavior of TC21 Titanium Alloy [J].
Nie, Baohua ;
Zhao, Zihua ;
Chen, Dongchu ;
Liu, Shu ;
Lu, Minsha ;
Zhang, Jianglong ;
Liang, Fangming .
METALS, 2018, 8 (06)
[49]   Effect of hydrogen content on microstructures and room-temperature compressive properties of TC21 alloy [J].
Yuan, B. G. ;
Zheng, Y. B. ;
Gong, L. Q. ;
Chen, Q. ;
Lv, M. .
MATERIALS & DESIGN, 2016, 94 :330-337
[50]   Notch Effect on the Fatigue Behavior of a TC21 Titanium Alloy in Very High Cycle Regime [J].
Nie, Baohua ;
Chen, Dongchu ;
Zhao, Zihua ;
Zhang, Jianglong ;
Meng, Yu ;
Gao, Guiyan .
APPLIED SCIENCES-BASEL, 2018, 8 (09)
12345