Effect of tool angle on cutting force and residual stress in the oblique cutting of TC21 alloy

被引：0
作者：
Xu Zhang
Hongbing Wu
机构：
[1] Shanghai University of Engineering Science,College of Mechanical Engineering
[2] Zhejiang University,College of Mechanical and Energy Engineering, Ningbo Institute of Technology
来源：
The International Journal of Advanced Manufacturing Technology | 2018年 / 98卷
关键词：
Titanium alloy; Tool angle; Oblique model, cutting force; Residual stress; Simulation;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
As one new type alloy, titanium alloy TC21 is difficult to cut. To investigate the machinability, the oblique cutting process for TC21 alloy has been investigated deeply. In the study, one 3D finite element model (FEM) of oblique cutting was presented to simulate the oblique turning process of TC21 alloy. In the oblique cutting simulation of TC21 alloy, Johnson-Cook material law has been adopted. Through the simulation, stress, and temperature, residual stress distribution and cutting force in the oblique cutting of TC21 alloy was obtained. At the same time, the effect of tool angle on the cutting force and residual stress in the oblique cutting of TC21 alloy has been analyzed detailedly. In addition, the simulation results have been verified by the oblique cutting tests and the residual stress tests.
引用
收藏
页码：791 / 797
页数：6
相关论文
共 50 条
[21]   Research on Cutting Tool Wearing Principle of TC18 Titanium Alloy [J].
Guo, Wen ;
He, Zhen ;
Zhao, Dongping .
3RD INTERNATIONAL SYMPOSIUM ON MECHATRONICS AND INDUSTRIAL INFORMATICS, (ISMII 2017), 2017, :125-129
[22]   Improved Cutting Force Modelling in Micro-Milling Aluminum Alloy LF 21 Considering Tool Wear [J].
Lu, Xiaohong ;
Cong, Chen ;
Hou, Pengrong ;
Xv, Kai ;
Liang, Steven Y. .
APPLIED SCIENCES-BASEL, 2022, 12 (11)
[23]   Atomic simulation of the effect of annealing rate on cutting residual stress and mechanical properties of γ-TiAl alloy [J].
Yao, Peng ;
Liu, Longyue ;
Li, Haiyan ;
Cao, Hui ;
Ren, Zehai ;
Feng, Ruicheng ;
Liu, Jianhui .
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2024, 130 (07)
[24]   Application of pre-stressed cutting to aviation alloy: The effect on residual stress and surface roughness [J].
Ruitao, Peng ;
Linfeng, Zhao ;
Jiawei, Tong ;
Xiuli, Fu ;
Meiliang, Chen .
JOURNAL OF MANUFACTURING PROCESSES, 2021, 62 :501-512
[25]   Effect of crystal orientation on micro-stress distribution in a damage-tolerant titanium alloy TC21 [J].
Wang, Yushi ;
Yang, Guang ;
Zhang, Shengnan ;
Xiu, Shichao .
JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 924
[26]   Evaluation of tool wear in end milling of Ti-6A1-4V alloy using cutting force analysis - Relationship between cutting force and tool wear on various cutting conditions [J].
Korenaga S. ;
Uematsu T. ;
Ohsawa H. ;
Itoh Y. ;
Shizuka H. ;
Sakai K. .
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, 2017, 83 (05) :439-444
[27]   Effect of cutting fluids on surface residual stress in machining of waspaloy [J].
Yang, Shenliang ;
Jin, Xiaoliang ;
Engin, Serafettin ;
Kountanya, Raja ;
El-Wardany, Tahany ;
Lee, Seung-Yub .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2023, 322
[28]   Study on Cutting Force, Cutting Temperature and Machining Residual Stress in Precision Turning of Pure Iron with Different Grain Sizes [J].
Yinfei Yang ;
Lu Jin ;
Jinpeng Zhu ;
Jinxing Kong ;
Liang Li .
Chinese Journal of Mechanical Engineering, 2020, 33
[29]   ANALYTICAL STUDY ON THE CUTTING FORCE AND RESIDUAL STRESS IN WHIRLWIND MILLING OF A LARGE SCREW [J].
Guo, Qin ;
Wang, Yulin ;
Zhou, Bin .
JOURNAL OF THEORETICAL AND APPLIED MECHANICS, 2023, 61 (01) :65-76
[30]   Investigation on residual stress evolution in nickel-based alloy affected by multiple cutting operations [J].
Liu, Yang ;
Xu, Dongdong ;
Agmell, Mathias ;
Ahadi, Aylin ;
Stahl, Jan-Eric ;
Zhou, Jinming .
JOURNAL OF MANUFACTURING PROCESSES, 2021, 68 :818-833
12345