Curved sawing of thin lightweight components

被引：5

作者：

Hintze W. ^{[1
]}

Klingelhöller C. ^{[1
]}

Langhof O. ^{[1
]}

机构：

[1] Institute of Production Management and Technology, Hamburg University of Technology, Denickestr. 17, Hamburg

来源：

Production Engineering | 2014年 / 9卷 / 01期

关键词：

CFRP; Curved geometry; Edge trimming; Sawing;

D O I：

10.1007/s11740-014-0587-2

中图分类号：

学科分类号：

摘要：

Increasing application of carbon fibre reinforced plastic (CFRP) in lightweight constructions in aerospace, automotive and other industries requires high-performance cutting processes for edge trimming of thin shell structures. As an alternative to conventional processes, e.g. milling, a rigid abrasive circular saw blade is introduced. The limitation of cutting only almost-straight contours with circular saw blades is overcome by a novel tool geometry and process kinematic that allows curve cutting with radius R< mm on thin plane material (thickness t<10 mm). The kinematic for cutting almost arbitrarily shaped outlines with a circular tool on a five-axis machine is described and proven by cutting a reference component. Besides high operating efficiency because of high feed rate the process features sound edge quality without noteworthy delamination of the outer layers, which is shown in pilot tests on CFRP with unidirectional top layers. © 2014, German Academic Society for Production Engineering (WGP).

引用

页码：51 / 59

页数：8

共 10 条

[1]

Aslantas K., Ozbek O., Ucun I., Buyuksagis I.S., Investigation of the effect of axial cutting force on circular diamond sawblade used in marble cutting process, Mater Manuf Process, 24, 12, pp. 1423-1430, (2009)

[2]

Hintze W., Hartmann D., Modeling of delamination during milling of unidirectional CFRP, Procedia CIRP, 8, pp. 444-449, (2013)

[3]

Hintze W., Hartmann D., Schutte C., Occurrence and propagation of delamination during the machining of carbon fibre reinforced plastics (CFRPs)—an experimental study, Compos Sci Technol, 71, 15, pp. 1719-1726, (2011)

[4]

Hocheng H., Machining technology for composite materials: principles and practice, (2012)

[5]

Mizuno M., Iyama T., Zhang B., Analysis of the sawing process with abrasive circular saw blades, J Manuf Sci Eng, 130, 1, pp. 011-012, (2008)

[6]

Schulze V., Becke C., Pabst R., Specific machining forces and resultant force vectors for machining of reinforced plastics, CIRP Ann Manuf Technol, 60, 1, pp. 69-72, (2011)

[7]

Sheikh-Ahmad J.Y., Machining of polymer composites, (2008)

[8]

Sheikh-Ahmad J.Y., Urban N., Cheraghi H., Machining damage in edge trimming of CFRP, Mater Manuf Process, 27, 7, pp. 802-808, (2012)

[9]

Teti R., Machining of composite materials, CIRP Ann Manuf Technol, 51, 2, pp. 611-634, (2002)

[10]

Yamada Y., Osumi N., Takasugi A., Sasahara H., Curved-line cutting using a flexible circular saw, J Adv Mech Des Syst Manuf, 6, 6, pp. 971-978, (2012)

← 1 →