Fabrication and heat treatment of ceramic-reinforced aluminium matrix composites- A review

被引：58

作者：

Das D.K. ^{[1
]}

Mishra P.C. ^{[1
]}

Singh S. ^{[1
]}

Pattanaik S. ^{[1
]}

机构：

[1] School of Mechanical Engineering, KIIT University, Bhubaneswar, 751024, Odisha

来源：

International Journal of Mechanical and Materials Engineering | 2014年 / 9卷 / 1期

关键词：

Aluminium matrix composites; ASM T6; Heat treatment; Permanent mould technique; Stir casting;

D O I：

10.1186/s40712-014-0006-7

中图分类号：

学科分类号：

摘要：

Ceramic-reinforced aluminium matrix composites have attracted considerable attention in engineering applications as a result of their relatively low costs and characteristic isotropic properties. Reinforcement materials include carbides, nitrides and oxides. In an effort to achieve optimality in structure and properties of ceramic-reinforced metal matrix composites (MMCs), various fabrication and heat treatment techniques have evolved over the last 20 years. In this paper, the status of the research and development in fabrication and heat treatment techniques of ceramic-reinforced aluminium matrix composites is reviewed, with a major focus on material systems in terms of chemical compositions, weight or volume fraction, particle size of reinforcement, fabrication methods and heat treatment procedures. Various optical measurement techniques used by the researchers are highlighted. Also, limitations and needs of the technique in composite fabrication are presented in the literature. The full potential of various methods for fabricating ceramic-reinforced aluminium matrix composites is yet to be explored. © 2014 Das et al.

引用

共 59 条

[21]

Hung N.P., Boey F.Y.C., Khor K.A., Oh C.A., Lee H.F., Machinability of cast and powder-formed aluminium alloys reinforced with SiC particles, Journal of Materials Processing Technology, 48, pp. 291-297, (1995)

[22]

Hung N.P., Loh N.L., Xu Z.M., Cumulative tool wear in machining metal matrix composites. Part II: Machinability, Journal of Materials Processing Technology, 58, pp. 114-120, (1996)

[23]

Jayaram V., Biswas S.K., -Sic-(Al, Si) Melt Oxidised Ceramic Composites. Wear, 225-229, pp. 1322-1326, (1999)

[24]

Joardar H., Das N.S., Sutradhar G., An experimental study of effect of process parameters in turning of LM6/SiCP metal matrix composite and its prediction using response surface methodology, International Journal of Engineering, Science and Technology, African Journals Online (AJOL), 3, 8, pp. 132-141, (2011)

[25]

Kalkanli A., Yilmaz S., Synthesis and characterization of aluminum alloy 7075 reinforced with silicon carbide particulates, Materials and Design, 29, pp. 775-780, (2008)

[26]

Khalifa T.A., Mahmoud T.S., Elevated temperature mechanical properties of Al Alloy AA6063/SiCp MMCs, Proceedings of the World Congress on Engineering, (2009)

[27]

Ko B.C., Yoo Y.C., Hot deformation behaviour of AA2124 composites reinforced with both particles and whiskers of SiC, Composites Science and Technology, 58, pp. 479-485, (1998)

[28]

Kok M., A study on the machinability of Al<sub>2</sub>O<sub>3</sub> particle reinforced aluminium alloy composite, Madrid: 11Th Int. Inorganic Bonded Fibre Composites Conference, (2008)

[29]

Kumar R., Dhiman S., A study of sliding wear behaviors of Al-7075 alloy and Al-7075 hybrid composite by response surface methodology analysis, Materials and Design, 50, pp. 351-359, (2013)

[30]

Kumar N.V.R., Dwarakadasa E.S., Effect of matrix strength on the mechanical properties of Al–Zn–Mg/SiCP composites, Composites Part A: Applied Science and Manufacturing, 31, 10, pp. 1139-1145, (2000)

← 1 2 3 4 5 6 →