Composite Materials Based on Al2O3–SiC–TiB2 Obtained by SHS Extrusion and Their High-Temperature Annealing

被引：0
作者：
A. P. Chizhikov
A. S. Konstantinov
M. S. Antipov
P. M. Bazhin
A. M. Stolin
机构：
[1] Institute of Structural Macrokinetics and Materials Science named after A. G. Merzhanov (ISMAN),
[2] Russian Academy of Sciences,undefined
来源：
Refractories and Industrial Ceramics | 2021年 / 62卷
关键词：
self-propagating high-temperature synthesis (SHS); aluminum oxide; titanium diboride; silicon carbide; SHS-extrusion; composite material; heat treatment;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
As a result of the combination of the processes of self- propagating high-temperature synthesis (SHS) and shear high-temperature deformation, realized in the method of SHS-extrusion, ceramic rods based on Al2O3–SiC–TiB2 were obtained. The influence of technological parameters of the process (delay time, pressing pressure) on the length of the obtained rods has been studied. The obtained materials were annealed in the range 1000 – 1300°C, and the microstructure and phase composition of the materials were studied before and after heat treatment.
引用
收藏
页码：343 / 346
页数：3
相关论文
共 51 条
  • [1] Tontisakis A(2021)Evaluation of surface finish technology in the manufacture of oxide-oxide ceramic matrix composites Ceram. Int. 47 5347-5363
  • [2] Simpson W(2021)Zirconia-alumina composites obtained by centrifugal slip casting as attractive sustainable material for application in construction Materials 14 250-775
  • [3] Lincoln J(2021)Mechanical and friction properties of Al Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 52 767-903
  • [4] Zygmuntowicz J(2013)O Inorg. Mater. 49 899-32
  • [5] Tomaszewska J(2019)–ZrO Refract. Ind. Ceram. 60 24-28968
  • [6] Zurowski R(2020)–TiC composite with varying TiC contents fabricated by spark plasma sintering Ceram. Int. 46 28961-109
  • [7] Zhu YB(2019)Effect of pre-heat treatment and cobalt doping of hydrargillite on the kinetics of the hydrargillite-corundum transformation in supercritical water fluid Precis. Eng. 59 90-456
  • [8] Chai JL(2020)Aluminum oxide and alumina ceramics (review). Part 1. Properties of Al Procedia. Manuf. 48 452-2957
  • [9] Shen TL(2021)O J. Eur. Ceram. Soc. 41 2948-295
  • [10] Panasyuk GP(2018) and commercial production of dispersed Al Refract. Ind. Ceram. 59 290-6211
123456