Thermal transport enhancement of multi-walled carbon nanotubes/ high-density polyethylene composites

被引:0
作者
F. Wu
X. He
Y. Zeng
H.-M. Cheng
机构
[1] Chinese Academy of Sciences,Shenyang National Laboratory for Materials Science, Institute of Metal Research
[2] Shenyang Institute of Chemical Technology,undefined
来源
Applied Physics A | 2006年 / 85卷
关键词
Thermal Diffusivity; HDPE; Thermal Transport Property; HDPE Matrix; Pure HDPE;
D O I
暂无
中图分类号
学科分类号
摘要
Multi-walled carbon nanotubes (MWCNTs) enhanced high-density polyethylene (HDPE) composites were prepared and their thermophysical properties were measured. The thermal diffusivity of the composites increases with the increase in the amount of MWCNTs. A thermal diffusivity of more than three times that of pure HDPE was obtained for 38 vol. % MWCNTs/HDPE composites. An equation based on an effective medium approach model was used to discuss the thermal diffusivity enhancement of MWCNTs/HDPE composites as a function of the volume fraction of MWCNTs. The results from this analysis can be a predictive guideline for further improvements in the thermal transport properties of MWCNTs/HDPE composites. Moreover, the intrinsic longitudinal thermal conductivity kz of an individual MWCNT was deduced from the measured results on the MWCNTs/HDPE composites.
引用
收藏
页码:25 / 28
页数:3
相关论文
共 50 条
  • [31] Effect of ozone treatment of carbon nanotube on PTC/NTC behaviors of high-density polyethylene matrix composites
    Park, SJ
    Seok, SJ
    Lee, JR
    Hong, SK
    POLYMER-KOREA, 2005, 29 (01) : 32 - 35
  • [32] A study on reactive enhancement of filler-filled high-density polyethylene
    Guo, SY
    Chen, XR
    Wu, JX
    Chen, GS
    POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2000, 39 (02) : 305 - 315
  • [33] The effect of primary sludge on the mechanical performance of high-density polyethylene composites
    Lahtela, Ville
    Mustonen, Kati
    Karki, Timo
    INDUSTRIAL CROPS AND PRODUCTS, 2017, 104 : 129 - 132
  • [34] Pulsed Nd:YAG laser heating and treatment on multi-walled carbon nanotubes film
    Nakamiya, Toshiyuki
    Mitsugi, F.
    Semba, K.
    Kozai, R.
    Ikegami, T.
    Iwasaki, Y.
    Sonoda, Y.
    Tsuda, R.
    THIN SOLID FILMS, 2010, 518 (22) : 6604 - 6608
  • [35] Positive temperature coefficient behavior of the graphite nanofibre and carbon black filled high-density polyethylene hybrid composites
    Li, Qi
    Kim, Jong-Wan
    Shim, Tae Hee
    Jang, Yun Ki
    Lee, Joong Hee
    MULTI-FUNCTIONAL MATERIALS AND STRUCTURES, PTS 1 AND 2, 2008, 47-50 : 226 - +
  • [36] Thermal properties and morphology of high-density polyethylene filled with coffee dregs
    Cestari Sibele Piedade
    Mendes Luis Claudio
    Journal of Thermal Analysis and Calorimetry, 2013, 114 : 1 - 4
  • [37] Thermal and thermo-catalytic degradation of high-density polyethylene waste
    Miskolczi, N
    Bartha, L
    Deák, G
    Jóver, B
    Kalló, D
    JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS, 2004, 72 (02) : 235 - 242
  • [38] Influence of Thermal Ratcheting on the Creep and Mechanical Properties of High-Density Polyethylene
    Jeya, Rahul Palaniappan Kanthabhabha
    Bouzid, Abdel-Hakim
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2019, 141 (04):
  • [39] Thermal properties and morphology of high-density polyethylene filled with coffee dregs
    Piedade, Cestari Sibele
    Claudio, Mendes Luis
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2013, 114 (01) : 1 - 4
  • [40] Enhancement of processability of rice husk filled high-density polyethylene composite profiles
    Panthapulakkal, S
    Law, S
    Sain, M
    JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2005, 18 (05) : 445 - 458