Surface free energy changes of stainless steel after one atmospheric pressure plasma treatment

被引：0
作者：
Shen Tang
Oh-June Kwon
Na Lu
Ho-Suk Choi
机构：
[1] Chungnam National University,Department of Chemical Engineering
来源：
Korean Journal of Chemical Engineering | 2004年 / 21卷
关键词：
Atmospheric Pressure Plasma; Contact Angle; Surface Free Energy; Aging Effect;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Stainless steel plates (AISI 304L) were treated by an atmospheric pressure plasma treatment at room temperature in order to modify the surface properties. After plasma treatment, the surface wettability and the surface free energy were both improved. The wettability and the surface free energy of stainless steel plates before and after plasma treatment were measured from the results of contact angle test. Through the results of contact angle and surface free energy, optimum plasma treatment conditions were obtained, such as the treatment time of 60 sec and the treatment power of 120 W. In addition to this, the optimum aging time was 3 to 5 min in air.
引用
收藏
页码：1218 / 1223
页数：5
相关论文
共 88 条
[1]  
Choi D. M.(1997)Adhesion Improvement of Epoxy Resin/Polyethylene Joints by Plasma Polymer 38 6243-6243
[2]  
Park D. K.(2003)Surface Modification effect on Film Growth with Atmospheric Ar/Ar+O Surf. Coat. Technol. 174-175 1038-1038
[3]  
Cho K.(1995) Plasma Carbon 33 853-853
[4]  
Park C. E.(1998)Surface Energy and Mechanical Properties of Plasma Modified Carbon Fibers Polym. Degradation Stab. 61 65-65
[5]  
Chung Y. M.(1992)Surface Modification of Polyvinylidene Fluoride (PVDF) under rf Ar Plasma Macromolecules 25 7313-7313
[6]  
Jung M. J.(2002)Control of Water Permeation by PH and Ionic Strength through a Porous Membrane Having Poly(carboxylic acid) Surface-Grafted Surf. Sci. 507-510 883-883
[7]  
Lee M. W.(2002)Surface Modification of Thin Polymeric Films by Air-plasma or UV-irradiation European Polym. J. 38 1915-1915
[8]  
Han J. G.(2002)The Influence of Side Groups and Polarity of Polymers on the Kind and Effectiveness of Their Surface Modification by Air Plasma Action Compos., Struc. 57 37-37
[9]  
Dilsiz N.(2004)Characteristics of Plasma Surface Treated Composite Adhesive Joints at High Environmental Temperature ,J. Colloid Interface Sci. 271 187-187
[10]  
Ering N. K.(2000)Effects of Atmospheric Plasma Treatment on The Interfacial Characteristics of Ethylene-vinyl Acetate/Polyurethane Composites Korean J. Chem. Eng. 17 33-33
123456789