Study of dispersion stability and thermo-physical properties of CuO-Jatropha oil-based nanolubricants

被引:0
作者
Dhananjay C. Katpatal
Atul B. Andhare
Pramod M. Padole
Rohit S. Khedkar
机构
[1] Kavikulguru Institute of Technology and Science,Department of Mechanical Engineering
[2] Visvesvaraya National Institute of Technology,Department of Mechanical Engineering
[3] Priyadarshini Institute of Engineering and Technology,Department of Chemical Engineering
来源
Journal of the Brazilian Society of Mechanical Sciences and Engineering | 2017年 / 39卷
关键词
CuO-Jatropha oil nanolubricant; Viscosity; Thermal conductivity;
D O I
暂无
中图分类号
学科分类号
摘要
In the present study, nanoparticles of surface-modified copper oxide and Jatropha oil are used to prepare stable nanolubricants of various concentrations by a two-step method. Viscosity and thermal conductivity of nanolubricants for different concentrations of CuO ranging from 0 to 5 wt% have been experimentally measured and strong dependence of both the properties on concentration of CuO in the Jatropha oil is observed. About 40 and 10% enhancement in viscosity and thermal conductivity of nanolubricant is observed for 5 wt% concentrations of CuO and the viscosity of nanolubricant comes closer to ISO VG46 mineral oil. Stability of nanolubricants at different temperatures has been checked by measuring viscosity at regular intervals of time and it is observed that stability decreases with increase of CuO loading. The experimental data of viscosity are matched with two viscosity models proposed by different authors, but the experimental data of viscosity and thermal conductivity are observed over prediction by classical theoretical models of viscosity and thermal conductivity. Based on the experimental data, various constants of correlations are calculated for predicting viscosity of CuO-Jatropha oil nanolubricants at various concentrations and temperatures.
引用
收藏
页码:3657 / 3668
页数:11
相关论文
共 135 条
[31]  
Ahmadi H(2009)Hydrodynamic and heat transfer study of dispersed fluids with submicron metallic oxide particles Exp Thermal Fluid Sci 33 706-140
[32]  
Rashidi A(2006)Rheological behavior of ethylene glycol based titania nanofluids Appl Phys Lett 89 133108-858
[33]  
Mohtasebi SS(2014)Measurement of temperature-dependent thermal conductivity and viscosity of TiO Int J Therm Sci 77 108-147
[34]  
Alaei M(2009)-water nanofluids Colloids Surf A 1 136-670
[35]  
Hwang YJ(2015)Measurements of nanofluid viscosity and its implications for thermal applications IEEE Trans Dielectr Electr Insul 22 851-669
[36]  
Ahn YC(2013)Rheology of mineral oil-SiO Int Commun Heat Mass Transfer 2013 142-1495
[37]  
Shin HS(2016) nanofluids at high pressure and high temperatures Tribol Trans 59 663-53
[38]  
Lee CG(2012)Silicon oil based multiwalled carbon nanotubes nanofluid with optimized thermal conductivity enhancement Int Commun Heat Mass Transf 39 665-64
[39]  
Kim GT(2011)High thermal conductivity transformer oil filled with BN nanoparticles Exp Thermal Fluid Sci 35 1490-191
[40]  
Park HS(2013)Preparation and thermal properties of oil-based nanofluid from multi-walled carbon nanotubes and engine oil as nano-lubricant Appl Therm Eng 56 45-2254