Influence of Laser Modification of the Surface Layer of Al2O3–TiC Ceramics on the Reliability of Cutters Under Stationary Operating Conditions

被引：0
作者：
V. V. Kuzin
S. N. Grigor’ev
S. Yu. Fedorov
M. A. Volosova
机构：
[1] Moscow State Technological University Stankin,
来源：
Refractories and Industrial Ceramics | 2022年 / 63卷
关键词：
Al; O; –TiC ceramics; pulsed laser modification; surfaces; surface layer (SL); functional surface layer (FSL); reliability; failure; wear; crack; indentation;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Pulsed laser modification of the surface layer of an Al2O3–TiC ceramic had a positive effect on the reliability of cutters when turning hardened steel SHX15. The greatest effect was recorded at the initial stage of operation of ceramic tools and was associated with an increase in the hardness and crack resistance of the modified ceramic surface layer.
引用
收藏
页码：436 / 440
页数：4
相关论文
共 42 条
[1]  
Vigneau J(1988)Reliability of ceramic cutting tools CIRP Ann. 37 101-104
[2]  
Bordel P(2017)Reliability analysis of ceramic cutting tools in continuous and interrupted hard turning Ceram. Int. 43 10109-10122
[3]  
Geslot R(2021)Reliability prediction of a microwave sintered Si Ceram. Int. 47 16737-16745
[4]  
Cui X(2015)N Appl. Mech. Mater. 752–753 268-271
[5]  
Jiao F(2021)-based composite ceramic tool Ceram. Int. 47 5776-5785
[6]  
Ming P(2022)Designing of details taking into account degradation of structural ceramics at exploitation Ceram. Int. 48 13695-13705
[7]  
Xu W(2010)Optimization of sintering parameters for fabrication of Al Int. J. Refract. Met. Hard Mater. 28 330-337
[8]  
Yin Z(2019)O Ceram. Int. 45 20593-20599
[9]  
Yuan J(2009)/TiN/TiC micro-nano-composite ceramic tool material based on microstructure evolution simulation Wear 266 1021-1028
[10]  
Kuzin V(2004)Cutting performance and wear mechanisms of the graphene-reinforced Al Russ. Eng. Res. 24 40-46
12345