Characterization of microstructure of H13 tool steel using ultrasonic measurements

被引：0
|
作者：
Ilven Mutlu
Enver Oktay
Sinasi Ekinci
机构：
[1] Istanbul University,Department of Metallurgical and Materials Engineering
[2] Cekmece Nuclear Research and Training Center,Industrial Application Department
来源：
Russian Journal of Nondestructive Testing | 2013年 / 49卷
关键词：
Ultrasonic; Heat treatment; Microstructure; Grain size; H13 tool steel;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
This study presents nondestructive characterization of microstructure of AISI H13 hot work tool steel. Heat treatments were carried out in order to obtain different microstructural phases in the tool steel specimens. The microstructural phases were characterized by metallographic examinations and hardness measurements. Velocities of ultrasonic longitudinal and transverse waves were measured by means of pulse-echo method using contact type normal beam probes. Ultrasonic apparent attenuation also determined in the steel specimens having different microstructural phases. A lower value of ultrasonic velocity was observed for the martensite compared to the other microstructures, while the opposite was observed in ultrasonic attenuation. Results show that the use of ultrasonic measurements in order to correlate them with the microstructures is fast and reliable, permitting nondestructive characterization of microstructure in steels.
引用
收藏
页码：112 / 120
页数：8
相关论文
共 50 条
  • [1] Characterization of microstructure of H13 tool steel using ultrasonic measurements
    Mutlu, Ilven
    Oktay, Enver
    Ekinci, Sinasi
    RUSSIAN JOURNAL OF NONDESTRUCTIVE TESTING, 2013, 49 (02) : 112 - 120
  • [2] Microstructure and property optimization of LENS deposited H13 tool steel
    Brooks, J
    Robino, C
    Headley, T
    Goods, S
    Griffith, M
    SOLID FREEFORM FABRICATION PROCEEDINGS, AUGUST 1999, 1999, : 375 - 382
  • [3] Microstructure and formation mechanism of composite chromized layer of H13 tool steel
    Wu, Cui-Lan
    Luo, Cheng-Ping
    Chen, Zhen-Hua
    Zou, Gan-Feng
    Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2007, 28 (03): : 93 - 97
  • [4] Microstructure and Mechanical Properties of Laser Additive Manufactured H13 Tool Steel
    Trojan, Karel
    Ocelik, Vaclav
    Capek, Jiri
    Cech, Jaroslav
    Canelo-Yubero, David
    Ganev, Nikolaj
    Kolarik, Kamil
    De Hosson, Jeff T. M.
    METALS, 2022, 12 (02)
  • [5] Nondestructive Characterization of Microstructure and Mechanical Properties of Heat Treated H13 Tool Steel Using Magnetic Hysteresis Loop Methodology
    Kahrobaee, Saeed
    Sahraei, Hossein Norouzi
    Akhlaghi, Iman Ahadi
    RESEARCH IN NONDESTRUCTIVE EVALUATION, 2019, 30 (05) : 303 - 315
  • [6] Effect of Niobium on Microstructure of Cast AISI H13 Hot Work Tool Steel
    Shahram Kheirandish
    Ahmad Noorian
    JournalofIronandSteelResearch(International), 2008, (04) : 61 - 66
  • [7] Microstructure and Properties of Low Temperature Composite Chromized Layer on H13 Tool Steel
    Cuilan WU
    Journal of Materials Science & Technology, 2005, (02) : 251 - 255
  • [8] Wear mechanisms and microstructure of pulsed plasma nitrided AISI H13 tool steel
    Leite, M. V.
    Figueroa, C. A.
    Gallo, S. Corujeira
    Rovani, A. C.
    Basso, R. L. O.
    Mei, P. R.
    Baumvol, I. J. R.
    Sinatora, A.
    WEAR, 2010, 269 (5-6) : 466 - 472
  • [9] Microstructure and properties of low temperature composite chromized layer on H13 tool steel
    Wu, CL
    Luo, CP
    Zou, GF
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2005, 21 (02) : 251 - 255
  • [10] Correlation between Microstructure and Mechanical Properties of the Additive Manufactured H13 Tool Steel
    An, Woojin
    Park, Junhyeok
    Lee, Jungsub
    Choe, Jungho
    Jung, Im Doo
    Yu, Ji-Hun
    Kim, Sangshik
    Sung, Hyokyung
    KOREAN JOURNAL OF MATERIALS RESEARCH, 2018, 28 (11): : 663 - 670
12345