An experimental investigation on oil mist characterization used in MQL milling process

被引：1
作者：
Arnaud Duchosal
René Leroy
Laurent Vecellio
Christophe Louste
N. Ranganathan
机构：
[1] Centre d’Etude et de Recherche sur les Outils Coupants–Laboratoire de Mécanique et Rhéologie,
[2] Laboratoire de Mécanique et Rhéologie–Polytech’ Tours,undefined
[3] DTF-Aerodrug,undefined
[4] Laboratoire d’Etudes Aérodynamiques,undefined
来源：
The International Journal of Advanced Manufacturing Technology | 2013年 / 66卷
关键词：
Minimum quantity lubricant; Oil mist; PIV.; Diffraction granulometry method; Residual gravimetric method; Outside nozzle device;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
In this study, a method is developed to determine the oil mist characteristics for the minimal quantity lubricant process. The oil mist is characterized by the size, velocity, and volume flow rate of its particles. In each case, a specific measurement process is used: the laser diffraction granulometry method, the particle image velocimetry, and the gravimetric method. These methods are used in the case of static and simple models with different inner channels. Experimental tests have been done with the same inner channel as the existing spindle inner channel. Different output models with different inner canalizations have been tested, using these experimental processes. The main goal is to control the characteristics of output oil mist as a function of the input oil mist device parameters.
引用
收藏
页码：1003 / 1014
页数：11
相关论文
共 112 条
  • [1] Klocke F(1997)Dry cutting Ann ClRP 46 519-526
  • [2] Eisenblatter G(2006)Effect of MQL on the tool life of small twist drills in deep-hole drilling Int J Mach Tool Manuf 46 1-6
  • [3] Heinemann R(2006)Experimental and numerical investigation on the effect of spray cutting fluids in high speed milling J Mater Process Technol 172 11-15
  • [4] Hinduja S(2006)An experimental investigation on the effect of minimum quantity lubrication in machining AISI 1040 steel Int J Mach Tool Manuf 47 748-753
  • [5] Barrow G(1997)The effect of extremely low lubricant volumes in machining Wear 210 76-82
  • [6] Petuelli G(2002)Development of a mixture supply for machining with minimal quantity lubrication CIRP Ann Manuf Technol 51 289-292
  • [7] Lopez de Lacalle LN(2002)Experimental evaluation on the effect of minimal quantities of lubricant in milling Int J Mach Tool Manuf 42 539-547
  • [8] Angulo C(2006)High speed grooving applying MQL Int J Mach Tool Manuf 46 1854-1861
  • [9] Lamikiz A(2007)High speed MQL finish turning of Inconel 718 with different coated tools J Mater Process Technol 192 281-286
  • [10] Sanchez JA(2008)Micro-liter lubrication machining of Inconel 718 Int J Mach Tools Manuf 48 1599-1604
12345678910