Experimental Verification of Force and Stiffness Between Two Ring Magnets Calculated by Monte Carlo Integration Technique

被引：2

作者：

Santra T. ^{[1
]}

Roy D. ^{[1
]}

Choudhury A.B. ^{[1
]}

Yamada S. ^{[2
]}

机构：

[1] Electrical Engineering Department, Indian Institute of Engineering Science and Technology, Shibpur, Howrah, 711103, WB

[2] Division of Biological Measurement and Application, Institute of Nature and Environmental Technology (K-INET), Kanazawa University, Kanazawa

来源：

Journal of The Institution of Engineers (India): Series B | 2019年 / 100卷 / 2期

关键词：

Magnetic force; Monte Carlo integration; Ring magnet; Stability; Stiffness;

D O I：

10.1007/s40031-019-00373-4

中图分类号：

学科分类号：

摘要：

This paper presents the calculation and experimental verification of force and stiffness between two concentric ring-shaped rare earth magnets. This kind of magnet configuration is invariably used in magnetic bearing, micromass measurement system, turbomachineries and space applications. Estimation of magnetic force and stiffness is always important in any application of permanent magnet as it influences the stability and performance of the system. Some analytical methods are available which involve direct solution of elliptic integral, which made the calculation tedious, complex, time- and space consuming. In this work, a simple approach based on Monte Carlo integration technique is proposed to calculate the force and stiffness. Monte Carlo integration technique is preferred to calculate the multidimensional elliptic integrals due to simplicity of the method, less computational time and memory requirement. The result is compared with existing finite element method and verified with experimental result. The verification process indicates that there is a small deviation in result of the proposed method from experimentally obtained result, but taking into account simplicity, space and time requirement, this approach may be considered to be a useful alternative method to calculate force and stiffness of a magnetic system. The proposed method is one of the best examples of utilizing an old computational concept in modern complicated problem solution. © 2019, The Institution of Engineers (India).

引用

页码：123 / 129

页数：6

共 14 条

[1]

Mukhopadhyay S.C., Ohji T., Iwahara M., Yamada S., Matsumura F., A new repulsive type magnetic bearing—modeling and control, IEEE Trans. Magn., 47, 1, pp. 100-108, (2000)

[2]

Ravaud R., Lemarquand G., Halbach structures for permanent magnets bearings, Prog. Electromagn. Res., 14, pp. 263-277, (2010)

[3]

Hussien A., Et al., Application of the repulsive-type magnetic bearing for manufacturing micro-mass measurement balance equipment, IEEE Trans. Magn., 41, 10, pp. 3802-3804, (2005)

[4]

Chu H.Y., Fan Y., Zhang C.S., A novel design for the flywheel energy storage system, Proceedings of the Eighth International Conference on Electrical Machines and S, 2, pp. 1583-1587, (2005)

[5]

Earnshaw S., On the nature of molecular forces which regulate the constitution of luminiferous ether, Trans. Camb. Philos. Soc., 7, pp. 97-112, (1839)

[6]

Jungmayr G., Marth E., Amrhein W., Berroth H.-J., Jeske F., Analytical stiffness calculation for permanent magnetic bearings with soft magnetic materials, IEEE Trans. Magn, 50, 8, (2014)

[7]

Samanta P., Hirani H., Magnetic bearing configurations: theoretical and experimental studies, IEEE Trans. Magn., 44, 2, pp. 292-300, (2008)

[8]

Yonnet J.P., Permanent magnetic bearings and couplings, IEEE Trans. Magn., 17, 1, pp. 1169-1173, (1981)

[9]

Delamare J., Rulliere E., Yonnet J.P., Classification and synthesis of permanent magnet bearing configurations, IEEE Trans. Magn., 31, 6, pp. 4190-4192, (1995)

[10]

Lang M., Fast calculation method for the forces and stiffness of permanent-magnet bearings, 8Th International Symposium on Magnetic Bearing, pp. 533-537, (2002)

← 1 2 →