Production of high-manganese steel in arc furnaces. Part 2

被引：0

作者：

Vdovin K.N. ^{[1
]}

Feoktistov N.A. ^{[1
]}

Sinitskii E.V. ^{[1
]}

Gorlenko D.A. ^{[1
]}

Durov N.A. ^{[2
]}

机构：

[1] Nosov Magnitogorsk State Technical University, Magnitogorsk

[2] Moscow Institute of Steel and Alloys, Moscow

来源：

Steel in Translation | 2016年 / 46卷 / 01期

关键词：

alloying with vanadium; argon injection; bulk content; calcium–strontium carbonate; impact strength; ladle treatment; nonmetallic inclusions;

D O I：

10.3103/S0967091216010150

中图分类号：

学科分类号：

摘要：

Metallographic data are presented for manganese steel before and after ladle treatment—specifically, treatment with calcium–strontium carbonate or argon injection in the ladle or both. Quantitative analysis of the nonmetallic inclusions is undertaken. The position of the inclusions relative to the grain boundaries is determined. Electron microscopy permits detailed study of the composition and form of the inclusions that appear during ladle treatment and without such treatment. The influence of various types of ladle treatment on the impact strength of manganese steel is discussed. Alloying of the manganese steel with vanadium is considered. Practical data regarding the influence of alloying with vanadium on the impact strength of the manganese steel are presented. © 2016, Allerton Press, Inc.

引用

页码：16 / 20

页数：4

共 10 条

[1] Production of high-manganese steel in arc furnaces. Part 1
Vdovin K.N.
Feoktistov N.A.
Sinitskii E.V.
Gorlenko D.A.
Durov N.A.
Steel in Translation, 2015, 45 (10) : 729 - 732
[2] An approach to calculating the casting temperature of high-manganese austenite steel
Arapov, S. L.
V. Belyaev, S.
Kosovich, A. A.
Partyko, E. G.
CIS IRON AND STEEL REVIEW, 2023, 26 : 45 - 50
[3] Effects of Al Addition on the Reaction between High-Manganese Steel and CaO-SiO2-Al2O3-MgO Slag
Yu, Huixiang
Yang, Dexin
Li, Muming
Zhang, Ni
STEEL RESEARCH INTERNATIONAL, 2020, 91 (10)
[4] Effect of Cooling Rate and High N Content on the Precipitation and Growth of AlN Inclusions in Fe-23Mn-2Al-0.08 V High-Manganese Nonmagnetic Steel
Zhang, Tao
Chen, Yue
Cheng, Guoguang
Yang, Xinlong
Chen, Xingrun
Pan, Jixiang
Huang, Yu
Wang, Qiming
STEEL RESEARCH INTERNATIONAL, 2023, 94 (01)
[5] Influence of Technological Parameters on the Physical, Mechanical and Operational Properties of Wear-Resistant Austenitic High-Manganese Steel, Metallofiz. Noveishie Tekhnol
Sazhnev, V. M.
Snizhnoi, G., V
METALLOPHYSICS AND ADVANCED TECHNOLOGIES, 2023, 45 (04) : 503 - 522
[6] Production of High-Quality Wheel Steel. Part 2. Nonmetallic Inclusion Composition and Morphology
Pumpyanskiy, D. A.
Tyutyunik, S. V.
Kolokolov, E. A.
Mescheryachenko, A. A.
Murzin, I. S.
Emel'yanov, V. V.
Belonozhko, S. S.
Arsenkin, A. M.
METALLURGIST, 2021, 65 (1-2) : 153 - 159
[7] Production of High-Quality Wheel Steel. Part 2. Nonmetallic Inclusion Composition and Morphology
D. A. Pumpyanskiy
S. V. Tyutyunik
E. A. Kolokolov
A. A. Mescheryachenko
I. S. Murzin
V. V. Emel’yanov
S. S. Belonozhko
A. M. Arsenkin
Metallurgist, 2021, 65 : 153 - 159
[8] Evolution mechanism of Ca-containing inclusions in 20Mn23AlV high-manganese non-magnetic steel during the refining process
Zhang, Tao
Cheng, Guoguang
Yang, Xinlong
Chen, Xingrun
Pan, Jixiang
Li, Jingyu
Huang, Yu
Li, Shijian
IRONMAKING & STEELMAKING, 2023, 50 (03) : 266 - 272
[9] Production of High-Quality Wheel Steel. Part 1. Production Aspects of Continuously-Cast Billet Quality for Railway Wheel Manufacture
D. A. Pumpyanskiy
S. V. Tyutyunik
E. A. Kolokolov
A. A. Mescheryachenko
I. S. Murzin
V. V. Emel’yanov
S. S. Belonozhko
A. M. Arsenkin
Metallurgist, 2021, 65 : 13 - 20
[10] Production of High-Quality Wheel Steel. Part 1. Production Aspects of Continuously-Cast Billet Quality for Railway Wheel Manufacture
Pumpyanskiy, D. A.
Tyutyunik, S. V.
Kolokolov, E. A.
Mescheryachenko, A. A.
Murzin, I. S.
Emel'yanov, V. V.
Belonozhko, S. S.
Arsenkin, A. M.
METALLURGIST, 2021, 65 (1-2) : 13 - 20

← 1 →