Effects of 3D Printing on Clay Permeability and Strength

被引：0
作者：
Morghan M. Carr
Yanbo Wang
Majid Ghayoomi
Pania Newell
机构：
[1] University of New Hampshire,Department of Civil and Environmental Engineering
[2] University of Utah,Department of Mechanical Engineering
来源：
Transport in Porous Media | 2023年 / 148卷
关键词：
3D printing; Additive manufacturing; Clay permeability; Clay shear strength;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
引用
收藏
页码：499 / 518
页数：19
相关论文
共 73 条
  • [1] Basak P(1977)Non-Darcy flow and its implications to seepage problems J. Irrig. Drain. Div. 103 459-473
  • [2] Chapuis RP(1992)Similarity of internal stability criteria for granular soils Can. Geotech. J. 29 711-713
  • [3] Chapuis RP(2012)Predicting the saturated hydraulic conductivity of soils: a review Bull. Eng. Geol. Env. 71 401-434
  • [4] Chen Z(2019)3D Printing of ceramics: a review J. Eur. Ceram. Soc. 39 661-687
  • [5] Li Z(1999)Permeability anisotropy of consolidated clays Geol. Soc. Spec. Publ. 158 79-96
  • [6] Li J(2004)Permeability of fine-grained soils Slovak Geol. Magaz. 10 3025-3312
  • [7] Liu C(2017)Pre-Darcy flow in porous media Water Resour. Res. 53 8187-8210
  • [8] Lao C(1999)Influence of clay fraction on pore-scale properties and hydraulic conductivity of experimentally compacted mudstones J. Geophys. Res. 104 29261-29274
  • [9] Fu Y(1994)Predicting the permeability function for unsaturated soil using the soil–water characteristic curve Can. Geotech. J. 31 533-546
  • [10] Liu C(1958)Some steady state solutions of the unsaturated moisture flow equation with application to evaporation from a water table Soil Sci. 85 228-232
12345678