Cemented Carbides Alloyed with Ruthenium, Osmium, and Rhenium

被引：0
作者：
Anatolii F. Lisovskii
机构：
[1] National Academy of Sciences of Ukraine,Institute for Superhard Materials
[2] Kiev,undefined
来源：
Powder Metallurgy and Metal Ceramics | 2000年 / 39卷
关键词：
cemented carbide; structure; physico-mechanical properties; ruthenium; osmium; rhenium;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
A study was made of the structure and mechanical properties of WC ― Co cemented carbides alloyed with Ru, Re, and Os. It was shown that the alloying elements form solid solutions with the binder phase, Co(Ru, W, C), Co(Re, W, C), Co(Os, W, C), which have higher microhardnesses and elastic moduli than the solid solution Co(W, C). Ruthenium, rhenium, and osmium reduce the stacking fault energy of the cobalt phase and promote the transformation of the cubic modification of cobalt to the hexagonal. This results in precipitation hardening of the binder phase. Additions of Ru, Re, and Os increase the hardness, and bend, compression and yield strengths, of WC ― Co alloys. Examples of the successful use of WC ― Co cemented carbide tools alloyed with noble metals for the machining of heat-resistant alloys and high-alloy steels are given.
引用
收藏
页码：428 / 433
页数：5
相关论文
共 28 条
  • [1] Chaporova I. N.(1984)Structure and properties of sintered hard alloys Metalloved. Term. Obrab. Met. 2 52-55
  • [2] Repina É. I.(1995)Creation of graded structures in sintered hard alloys Sverkhtverd. Mater. 1 27-34
  • [3] Sapronova Z. N.(1991)Composition and structure of cemented carbides produced by the MMI process Powder Met. Int. 23 157-161
  • [4] Kudryavtseva V. I.(1995)Composition and properties of (Ti, W)C — WC — Co sintered carbides alloyed by the MMI process Int. J. Refractory Metals and Hard Materials 13 379-383
  • [5] Lisovskii A. F.(1997)On the use of the MMI phenomenon for the formation of nanostructures in WC — Co cemented carbides Int. J. Refractory Metals and Hard Materials 15 227-235
  • [6] Tkachenko N. V.(1985)Stereological properties of heterogeneous materials Poroshk. Metall. 1 81-86
  • [7] Lisovsky A. F.(1980)On the selection of allowable stresses in structural calculations using the criterion of statistical strength Probl. Prochnosti 4 32-34
  • [8] Tkachenko N. V.(1991)Structure of binding phase in Re-alloyed Wc — Co cemented carbides Int. J. Refractory Metals and Hard Materials 10 33-36
  • [9] Lisovsky A. F.(1985)Binder deformation in WC — (Co, Ni) cemented carbide composites Met. Trans. A 16A 2309-2327
  • [10] Gracheva T. E.(1988)The mechanical behavior of cemented carbides at high temperatures Mater. Sci. Eng. A 106 343-351
123