The effect of cooling rate on the solidification and microstructure evolution in duplex stainless steelA DSC study

被引：0
作者：
Darja Steiner Petrovič
Miran Pirnat
Grega Klančnik
Primož Mrvar
Jožef Medved
机构：
[1] Institute of Metals and Technology,Faculty of Natural Sciences and Engineering
[2] Acroni,undefined
[3] d.o.o,undefined
[4] University of Ljubljana,undefined
来源：
Journal of Thermal Analysis and Calorimetry | 2012年 / 109卷
关键词：
DSC; Duplex stainless steel; Solidification; Cooling rate; Precipitation;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The effects of the cooling rate on the solidification and microstructure evolution in the duplex stainless steel SAF 2205 was studied using DSC and light microscopy. A ferritoscope was used to measure the ferrite content. It was revealed that the cooling rate has an influence on the δ-ferrite nucleation temperature and the width of the solidification interval. Moreover, with an increase in cooling rate, the content of δ-ferrite increases, while the quantity of austenite in the ferrite matrix decreases and its morphology changes to acicular. A two-cycle DSC experiment made possible a more accurate interpretation of the collected data.
引用
收藏
页码：1185 / 1191
页数：6
相关论文
共 47 条
  • [1] Maki T(2001)Microstructure development by thermomechanical processing in duplex stainless steel ISIJ Int 41 571-579
  • [2] Fufuhara T(2010)Transformation and precipitation kinetics in 30Cr10Ni duplex stainless steel Metal Mater Trans A. 41 2197-2207
  • [3] Tsuzaki K(2009)Effect of cooling rate on hot-crack susceptibility of duplex stainless steel Mater Sci Eng A 506 191-195
  • [4] Fazarinc M(2001)Nitride precipitation in weld HAZs of duplex stainless steel ISIJ Int 41 460-467
  • [5] Terčelj M(2002)Microstructural constituents of the Ni-based superalloy GMR 235 in the as-cast conditions Scr Mater 46 667-672
  • [6] Bombač D(2006)In situ observation of growth behaviour and morphology of delta-ferrite as function of solidification rate in an AISI304 stainless steel Acta Metall Sin 19 441-448
  • [7] Kugler G(2011)Differential scanning calorimetry study of the solidification of austenitic stainless steel J Therm Anal Calorim 105 251-257
  • [8] Li Z(2004)Thermal analysis of low alloy Cr–Mo steel J Therm Anal Calorim 75 947-956
  • [9] Zhong H(2006)Characterization of Duplex steel Uranus 76 N during deformation and heat treatment Phys Stat Sol A. 203 3651-3664
  • [10] Sun Q(2010)Multicycle differential scanning calorimetry J Therm Anal Calorim 101 1189-1197
12345