Modeling and numerical simulation of the chip formation process when machining Nomex

被引：0
作者：
Tarik Zarrouk
Jamal-Eddine Salhi
Samir Atlati
Mohammed Nouari
Merzouki Salhi
Najim Salhi
机构：
[1] First Mohammed University,Laboratory of Mechanics and Energy, Faculty of Sciences
[2] ESTO,undefined
[3] First Mohammed University,undefined
[4] LEM3 - Laboratoire d′Etude des Microstructures et de Mécanique des Matériaux,undefined
[5] CNRS-UMR 7239,undefined
[6] Université de Lorraine,undefined
[7] GIP-1InSIC,undefined
[8] 27 rue d’Hellieule,undefined
[9] 88100,undefined
来源：
Environmental Science and Pollution Research | 2022年 / 29卷
关键词：
Honeycomb; Nomex; Milling; Numerical modeling; Elastoplastic-isotropic;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The machining of Nomex honeycomb structures represents a technical and scientific barrier for aeronautical applications. The difficulties encountered during the machining of this type of material are linked to the low density of Nomex paper, and to the low thickness of the walls forming the honeycomb cells of this type of structure. In this work, a finite element calculation code “ABAQUS`- EXPLICIT” was used to optimize and analyze the machining by milling of Nomex honeycomb structures. The main objective of this work is to study the influence of the machining conditions on the cutting forces, and the morphology of the chips.
引用
收藏
页码：98 / 105
页数：7
相关论文
共 57 条
[1]  
Ahmad S(2020)Processing Technologies for Nomex Honeycomb Composites (NHCs): a critical review Compos Struct 250 112545-500
[2]  
Zhang J(2004)A study on milling of glass fiber reinforced plastics manufactured by hand-lay up using statistical analysis (ANOVA) Compos Struct 64 493-1952
[3]  
Feng P(2009)Mechanical tests for foldcore base material properties Compos Part A 40 1941-594
[4]  
Yu D(2007)Mechanical properties of Nomex material and Nomex honeycomb structure Compos Struct 80 588-510
[5]  
Wu Z(2017)A 3D FE modeling of machining process of Nomex® honeycomb core: influence of the cell structure behaviour and specific tool geometry Procedia Cirp 58 505-36
[6]  
Ma K(2013)Optimisation of machining parameters on milling of GFRP composites by desirability function analysis using Taguchi method Int J Eng Sci Technol 5 22-93
[7]  
Davim JP(2012)Mechanistic force modeling for milling of unidirectional carbon fiber reinforced polymer laminates Int J Mach Tools Manuf 56 79-549
[8]  
Reis P(2018)Investigating the effects of fluid intrusion on Nomex® honeycomb sandwich structures with carbon fiber facesheets Compos Struct 206 535-266
[9]  
Antonio CC(2014)Characterization of Nomex honeycomb core constituent material mechanical properties Compos Struct 117 255-222
[10]  
Fischer S(2014)Chip root analysis after machining carbon fiber reinforced plastics (CFRP) at different fiber orientations Procedia CIRP 14 217-1638
123456