Microstructure and Texture of 0.75%Si Non-oriented Electrical Steel Fabricated by Strip Casting Process

被引：5

作者：

Chen A.-H. ^{[1
]}

Li H.-L. ^{[1
]}

机构：

[1] Institute of Research of Iron and Steel, Shasteel, Zhangjiagang, 215625, Jiangsu

来源：

Metallography, Microstructure, and Analysis | 2016年 / 5卷 / 5期

关键词：

Microstructure; Non-oriented silicon steel; Strip casting; Texture;

D O I：

10.1007/s13632-016-0312-y

中图分类号：

学科分类号：

摘要：

Microstructure, texture, and magnetic properties of 0.75%Si non-oriented silicon steel fabricated by strip casting process were investigated. The as-cast strip exhibits strong λ fiber texture because of selective solidification along 〈100〉 orientation. It is found that hot rolling temperature greatly affects the grain size, texture, and magnetic properties of annealed strip. For those strips hot-rolled at 950 °C, the final specimens exhibit fine recrystallization microstructure and strong Goss texture, which gives rise to a core loss of P1.5 = 5.10 W/kg and magnetic induction of B50 = 1.80 T. In contrast, coarse recrystallization microstructure and strong λ fiber texture are found for those strips hot-rolled at 1050 °C, which results in lower core loss (P1.5 = 4.74 W/kg) and similar magnetic induction (B50 = 1.79 T). The present work helps to understand the microstructure and texture evolution in strip casting processes to optimize the magnetic properties. © 2016, Springer Science+Business Media New York and ASM International.

引用

页码：428 / 434

页数：6

共 20 条

[1] Huneus H., Gunther K., Kochmann T., Plutniok V., Schoppa A., Nonoriented magnetic steel with improved texture and permeability, J. Mater. Eng. Perform, 2, 2, (1993)
[2] Arai K.I., Ishiyama K., Recent developments of new soft magnetic materials, J. Magn. Magn. Mater., 133, 1-3, (1994)
[3] Landgraf F.J.G., Emura M., Teixeira J.C., de Campos M.F., Effect of grain size, deformation, aging and anisotropy on hysteresis loss of electrical steels, J. Magn. Magn. Mater., 215-216, (2000)
[4] Emura M., de Campos M.F., Landgraf F.J.G., Teixeira J.C., Angular dependence of magnetic properties of 2% silicon electrical steel, J. Magn. Magn. Mater., 226-230, (2001)
[5] Yonamine T., Landgraf F.J.G., Correlation between magnetic properties and crystallographic texture of silicon steel, J. Magn. Magn. Mater., 272-276, (2004)
[6] Masahashi N., Matsuo M., Watanabe K., Development of preferred orientation Fe–3.25 %Si in a high magnetic field, J. Mater. Res., 13, 2, (1998)
[7] Liu H.T., Schneider J., Li H.L., Sun Y., Gao F., Lu H.H., Song H.Y., Li L., Geng D.Q., Liu Z.Y., Wang G.D., Fabrication of high permeability non-oriented electrical steels by increasing 〈0 0 1〉 recrystallization texture using compacted strip casting processes, J. Magn. Magn. Mater., 374, (2015)
[8] Sonboli A., Toroghinejad M.R., Edris H., Szpunar J.A., Effect of deformation route and intermediate annealing on magnetic anisotropy and magnetic properties of a 1 wt% Si non-oriented electrical steel, J. Magn. Magn. Mater., 385, (2015)
[9] Rodrigues M.F., Da Cunha M.A., Da Cost Paolinelli S.S.F., Cota A.B., Texture and magnetic properties improvement of a 3% Si non-oriented electrical steel by Sb addition, J. Magn. Magn. Mater., 331, (2013)
[10] Wan Y., Chen W.Q., Wu S.J., Effect of lanthanum content on microstructure and magnetic properties of non-oriented electrical steels, J. Rare Earth, 31, 7, (2013)

← 1 2 →