Improving Production Efficiency and Quality of Pipes Based on Solving Tribotechnical Problems

被引：0

作者：

Kuznetsov V.I. ^{[1
]}

Vydrin A.V. ^{[1
,3
]}

Krasikov A.V. ^{[2
]}

Krivosheev A.A. ^{[1
]}

Pashnina E.Y. ^{[1
]}

Sokolov D.K. ^{[1
,3
]}

Neroznikov V.L. ^{[4
]}

机构：

[1] JSC Russsian Scientific Research Institute for Pipe Industry (RusNITI), Chelyabinsk

[2] JSC Volzhskiy Pipe Plant, Volgograd oblast, Volzhskiy

[3] South Ural State University (National Research University), Chelyabinsk

[4] JSC Taganrog Metallurgical Plant (TAGMET), Rostov oblast, Taganrog

来源：

Steel in Translation | 2022年 / 52卷 / 01期

关键词：

deoxidizing lubricants; friction coefficient; internal surface quality; Keywords: production of seamless hot-rolled pipes; lubricants; piercing; rolling; sizing;

D O I：

10.3103/S0967091222010168

中图分类号：

学科分类号：

摘要：

Abstract—Engineering solutions in pipe production are considered upon the development of tribological principles for reducing friction forces at the contacting surfaces in order to improve the quality of the resulting product. An experience in testing engineering solutions under industrial conditions with assessing economic effect resulting from their application in the manufacturing of pipes is presented. It is shown that achieving a high product quality at minimal cost with no use of modern lubricants is impossible. © 2022, Allerton Press, Inc.

引用

页码：113 / 120

页数：7

共 29 条

[1]

Grudev A.P., Tilik V., Tekhnologicheskie Smazki V Prokatnom Proizvodstve (Technological Lubrication Materials in Rolling-Mill Practice), (1975)

[2]

Grudev A.P., Vneshnee Trenie Pri Prokatke (External Friction at Rolling), (1973)

[3]

Chertavskikh A.K., Belosevich V.K., Trenie I Tekhnologicheskaya Smazka Pri Obrabotke Metallov Davleniem (Friction and Technological Lubrication at Metal Forming), (1968)

[4]

Veiler S.Y., Likhtman I.V., Deistvie smazok pri obrabotke metallov davleniem, (1960)

[5]

Manegin Y.V., Anisimova I.V., Steklosmazki i zashchitnye pokrytiya dlya goryachei obrabotki metallov davleniem, (1978)

[6]

Severdenko V.P., Makushok E.M., Ravin A.N., Okalina pri goryachei obrabotke metallov davleniem, (1977)

[7]

Ubbelohde A.R., Lewis F.A., Graphite and Its Crystal Compounds, (1960)

[8]

Kuznetsov V.I., Pyshmintsev I.J., Pumpjanskij D.A., Marchenko L.G., Krivosheev A.A., Processing tool working method, (2006)

[9]

Aleshchenko A.S., Gamin Y.V., Chan B.K., Tsyutsyura V.Y., Features of wear of the working tool at broaching of superalloys, Chern. Met., 8, pp. 63-70, (2018)

[10]

Romantsev B., Goncharuk A., Aleshchenko A., Gamin Y., Mintakhanov M., Development of multipass skew rolling technology for stainless steel and alloy pipes’ production, Int. J. Adv. Manuf. Technol., 9-12, pp. 3223-3230, (2018)

← 1 2 3 →