Effect of Direct Microalloying of Boron-Containing Structural Steels on Their Structure and Mechanical Properties

被引：0
作者：
Babenko A.A. [1 ]
Zhuchkov V.I. [1 ]
Akberdin A.A. [2 ]
Sychev A.V. [1 ]
Kim A.S. [2 ]
机构：
[1] Institute of Metallurgy of the Ural Branch of the Russian Academy of Sciences, Yekaterinburg
[2] Abishev Chemical and Metallurgical Institute, RSE National Center for Integrated Processing of Raw Materials of the Republic of Kazakhstan, Karaganda
来源：
Steel in Translation | 2020年 / 50卷 / 10期
基金：
俄罗斯基础研究基金会;
关键词：
boron; direct microalloying; manganese; mechanical properties; structural steel; structure; sulfur;
D O I：
10.3103/S0967091220100022
中图分类号：
学科分类号：
摘要：
Abstract: Under conditions of converter shop of JSC “ArcelorMittal Temirtau”, the authors have developed and implemented the direct microalloying technology of structural steels with boron. Microalloying was carried out due to boron recovery from the slags of the CaO–SiO2–B2O3–MgO–Al2O3 system formed in ladle furnaces. The use of the developed technology was provided in steels 08KP, 3SP, 3PS and 09G2S boron content of 0.0016–0.0050%, with a sufficiently high degree of metal desulfurization 36.8–51.7% and reduction in manganese ferroalloys consumption by 0.3–0.6 kg/t of steel, which improved the environmental situation by eliminating the use of fluorspar. For 09G2S steel, the yield σy and tensile σt strengths are higher for the experimental metal then for the steel without boron by an average 27 and 24 MPa, respectively. The elongation percentage of the metal with boron increased by an average 0.2%. The grain-size index of rolled metal of 08KP steel with a thickness of 2.0–2.5 mm, containing 0.001% of boron and a manganese concentration lowered to 0.18%, reaches 10.0 in contrast to 9.0 for the heats of the current production. The yield σy and tensile σt strengths are on average by 6.0 and 5.0 MPa higher for an experimental metal than for a comparative one. The percentage of elongation δ reaches 36.3% for the experimental metal unlike 33.3% for the heats of the current production. Experimental rolled metal of 3PС steel with lower concentration of manganese lowered by 0.02%, as well as with an average boron content of 0.001%, is characterized by an increased yield strength σy, tensile strength σt (on average by 2.0 and 9.0 MPa) and percentage of elongation δ reaching an average of 21.0% with fine-grained structure. The rolled metal of 3SP steel, microalloyed with boron and with a 4-mm thickness that contains manganese content reduced to 0.43%, is characterized by improved strength properties with preservation of plastic characteristics. The absolute value of the yield σy and tensile σt strengths of steel are by 4.0 and 2.0 MPa higher than the strength characteristics of steel without boron. © 2020, Allerton Press, Inc.
引用
收藏
页码：680 / 683
页数：3
相关论文
共 20 条
[1]  
Pilyushenko V.L., Vikhleshchuk V.A., Nauchnye I Tekhnologicheskie Osnovy Mikrolegirovaniya Stali (Scientific and Technological Foundations of Steel Microalloying), (2000)
[2]  
Golubtsov V.A., Lunev V.V., Modifitsirovanie stali dlya otlivok i slitkov (Modification of Steel for Castings and Ingots), Zaporozhye: Zaporozh. Nats. Tekh. Univ., (2009)
[3]  
Gol'Dshtein Y.E., Mizin V.G., Modifitsirovanie I Mikrolegirovanie Chuguna I Stali (Modification and Microalloying of Cast Iron and Steel), (1986)
[4]  
Grange R.A., Boron, Calcium, Columbium, and Zirconium in Iron and Steel, (1957)
[5]  
Lyakishev N.P., Pliner Y.L., Lappo S.I., Borsoderzhashchie Stali I Splavy (Boron-Containing Steels and Alloys), (1986)
[6]  
Babenko A.A., Zhuchkov V.I., Leont'Ev L.I., Et al., Microalloying of boron-containing steel as a promising direction for increasing the competitiveness of domestic metal products, Trudy Nauchno-Prakticheskoi Konferentsii “Perspektivy Razvitiya Metallurgii I Mashinostroeniya S ispol’zovaniem Zavershennykh fundamental’nykh Issledovanii I NIOKR” (Proc. Sci.-Pract. Conf. “Prospective Development of Metallurgy and Machine Engineering Using Completed Fundamental Studies and R&D), pp. 162-165, (2013)
[7]  
Pickering F.B., Physical Metallurgy and the Design of Steels, (1978)
[8]  
Heckmann C.J., Ormston D., Grimpe F., Development of low carbon Nb–Ti–B microalloyed steels for high strength large diameter linepipe, Ironmaking Steelmaking, 32, pp. 337-371, (2005)
[9]  
Upadhyay N., Pujar M.G., Sakthivel T., Mallika C., Laha K., Mudali Kamachi U., Effect of addition of boron and nitrogen on the corrosion resistance of modified 9Cr–1Mo ferritic steel, Procedia Eng, 86, pp. 606-614, (2014)
[10]  
Zhang Y.-L., Zhang Y.-Y., Yang F.-H., Zhang Z.-T., Effect of alloying elements (Sb, B) on recrystallization and oxidation of Mn-containing IF steel, J. Iron Steel Res. Int, 20, pp. 39-44, (2013)
12