Prospects of manufacturing spiroid gears with small gear ratios; [Aussichten der Herstellung von Spiroid-Zahnrädern mit kleinen Zahnrad-Verhältnissen]

被引：0

作者：

Goldfarb V.I. ^{[1
]}

Trubachev E.S. ^{[1
]}

Bogdanov K.V. ^{[1
]}

Pushkareva T.A. ^{[1
]}

机构：

[1] Scientific Department “Institute of Mechanics”, Federal State Budget Educational Institution “Kalashnikov Izhevsk State Technical University”, Izhevsk

来源：

Forschung im Ingenieurwesen | 2019年 / 83卷 / 3期

关键词：

D O I：

10.1007/s10010-019-00343-8

中图分类号：

学科分类号：

摘要：

Production of spiroid gears as alternatives to bevel and hypoid ones, when the gear ratio of the spiroid gear should be less than 10 (often less than 6) is traditionally related to problems of manufacturing multi-thread worms and hobs. Different versions of solving this problem in diversified series and mass production are considered. For the first case, improvements of traditional methods of analysis and the production technique are proposed basing on application of multi-thread hobs or multi-tooth assembled running-in cutting heads. For the second case, high production-efficient methods of gear machining of both gear elements are provided; they are implemented at simple and common lathes after their little modification. Features and restrictions of these methods are described. Numerical examples are given for the possible substitution of truck and tram hypoid gears by different versions of spiroid gears providing application of various methods of gearwheel tooth cutting while both keeping the same basic dimensions of parts and mounting dimensions and varying these dimensions. It is noted, that when choosing the parameters of spiroid gearing and machine-tool settings, there are methods of efficient control of operation and layout parameters of the gear, the level of contact localization and tool parameters. © 2019, Springer-Verlag GmbH Deutschland, ein Teil von Springer Nature.

引用

页码：781 / 791

页数：10

共 18 条

[1]

Goldfarb V.I., Glavatskikh D.V., Trubachev E.S., Spiroid gears with small gear ratios. Some problems of design and production. Proceedings on the International Conference on Gears, pp. 429-442, (2010)

[2]

(2019)

[3]

Georgiev A.K., Development of main gears of passenger cars. Report on scientific research work. Izhevsk, (1972)

[4]

Umnyashkin V.A., Kolmakov V.I., Ivaikin V.A., Goryanskiy G.N., On results of comparative laboratory road tests of spiroid and hypoid main gears of rive axles of cars for scuffing resistance. In: “Prospects of development and application of spiroid gears and gearboxes. Reports of the All-Union scientific technical meeting”, Izhevsk Izhevsk Mech Inst, pp, pp. 80-84, (1979)

[5]

Georgiev A.K., Maltsev Yu I., Mansurov I.I., To the question of choosing the rational design and geometrical parameters of running-in cutters for producing gearwheels of main gears by gear cutting. In: “Prospects of development and application of spiroid gears and gearboxes. Reports of the All-Union scientific technical meeting”, Izhevsk Izhevsk Mech Inst, pp, pp. 39-45, (1979)

[6]

Trubachev E.S., Method of calculation of parameters of machine-tool meshing with the helicon generating surface. In: “Advanced information techniques, Probl Investig Des Prod Gears” Izhevsk, pp, pp. 163-169, (2001)

[7]

Goldfarb V.I., Trubachev E.S., Savelieva T.V., Unification of the hobs in spiroid gears, 2005, pp. 1755-1759, (1904)

[8]

Goldfarb V.I., Trubachev E.S., System of hob unification for cutting gearwheels of worm-type gears. Proceedings of the, 2007, (2007)

[9]

Goldfarb V.I., Et al., Spiroid gearboxes of pipeline valves, (2011)

[10]

(2019)

← 1 2 →