Research on tooth profile modification based on system dynamic characteristics under thermoelastic coupling condition

被引：1
作者：
Biao Luo
Wei Li
机构：
[1] University of South China,School of Mechanical Engineering
[2] University of Science and Technology Beijing,School of Mechanical Engineering
来源：
Meccanica | 2019年 / 54卷
关键词：
Thermal dynamic characteristics; Tooth profile modification; Thermoelastic coupling condition; Gear transmission system;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The tooth profile modification was considered as a part of the static error of a gear transmission system. Subsequently, the thermodynamic equation of the system after the tooth profile modification was derived by introducing the equivalent static transmission error and thermal meshing stiffness. The effect of the tooth profile modification on the dynamic characteristics of the gear transmission system under the thermoelastic coupling condition was systematically analysed. Then the optimal thermal tooth profile modification method of gear which considered the thermal dynamic characteristics was obtained. The results indicate that the tooth profile modification is equivalent to increasing the load excitation of the system, and the load increment is equal to the sum of the products of the meshing stiffness and modification amount of each related single tooth pair. After modification, the response of the system dynamic error tends to be constant, and the dynamic load coefficient is approximately 1.0.
引用
收藏
页码：1499 / 1513
页数：14
相关论文
共 111 条
  • [11] Yu J(2016)Effects of tooth profile modification on dynamic responses of a high speed gear-rotor-bearing system Mech Syst Signal Process 76–77 294-1154
  • [12] Lin J(2014)Effects of tip relief on vibration responses of a geared rotor system Proc Inst Mech Eng C J Mech Eng Sci 228 1132-1884
  • [13] Parker RG(2016)Nonlinear vibration of the bevel gear with teeth profile modification Nonlinear Dyn 83 1875-023301-11
  • [14] Li YZ(2016)Optimization of profile modifications with regard to dynamic tooth loads in single and double-helical planetary gears with flexible ring-gears J Mech Des 138 023301-1-273
  • [15] Ding K(2017)Effect of mesh stiffness of healthy and cracked gear tooth on modal and frequency response characteristics of geared rotor system Mech Mach Theory 107 261-441
  • [16] He GL(2016)frequency spectrum and vibration analysis of high speed gear-rotor system with tooth root crack considering transmission error excitation Eng Fail Anal 60 405-5823
  • [17] Lin HB(2012)Dynamic analysis of a geared rotor system considering a slant crack on the shaft J Sound Vib 331 5803-624
  • [18] Liu CZ(2016)Dynamic response and time-frequency analysis for gear tooth crack detection Mech Syst Signal Process 66–67 612-2659
  • [19] Qin DT(2017)Effects of tooth plastic inclination deformation due to spatial cracks on the dynamic features of a gear system Nonlinear Dyn 87 2643-222
  • [20] Lim TC(2016)The nonlinear dynamics response of cracked gear system in a coal cutter taking environmental multi-frequency excitation forces into consideration Nonlinear Dyn 84 203-1266
12345678910