Research on tooth profile modification based on system dynamic characteristics under thermoelastic coupling condition

被引：1
作者：
Biao Luo
Wei Li
机构：
[1] University of South China,School of Mechanical Engineering
[2] University of Science and Technology Beijing,School of Mechanical Engineering
来源：
Meccanica | 2019年 / 54卷
关键词：
Thermal dynamic characteristics; Tooth profile modification; Thermoelastic coupling condition; Gear transmission system;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The tooth profile modification was considered as a part of the static error of a gear transmission system. Subsequently, the thermodynamic equation of the system after the tooth profile modification was derived by introducing the equivalent static transmission error and thermal meshing stiffness. The effect of the tooth profile modification on the dynamic characteristics of the gear transmission system under the thermoelastic coupling condition was systematically analysed. Then the optimal thermal tooth profile modification method of gear which considered the thermal dynamic characteristics was obtained. The results indicate that the tooth profile modification is equivalent to increasing the load excitation of the system, and the load increment is equal to the sum of the products of the meshing stiffness and modification amount of each related single tooth pair. After modification, the response of the system dynamic error tends to be constant, and the dynamic load coefficient is approximately 1.0.
引用
收藏
页码：1499 / 1513
页数：14
相关论文
共 111 条
  • [1] Fernandez Del Rincon A(2013)A model for the study of meshing stiffness in spur gear transmissions Mech Mach Theory 61 30-58
  • [2] Viadero F(2013)Mesh stiffness of an internal spur gear pair with ring gear rim deformation Mech Mach Theory 69 1-12
  • [3] Iglesias M(2016)tooth profile modification of spur gear based on fuzzy comprehensive decision Chin J Eng 30 1458-321
  • [4] García P(1999)Analytical characterization of the unique properties of planetary gear free vibration J Vib Acoust 121 316-201
  • [5] de-Juan A(2016)Vibration mechanisms of spur gear pair in healthy and fault states Mech Syst Signal Process 81 183-6515
  • [6] Sancibrian R(2014)Dynamic characteristics of the herringbone planetary gear set during the variable speed process J Sound Vib 333 6498-89
  • [7] Chen ZG(2015)Vibration characteristic analysis of helical gear–rotor–bearing system with coupled lateral–torsional–axial Chin J Mech Eng 51 75-55
  • [8] Shao YM(2017)Nonlinear dynamics analysis of the spur gear system for railway iocomotive Mech Syst Signal Process 85 41-478
  • [9] Luo B(2011)Nonlinear dynamic characteristics of geared rotor bearing systems with dynamic backlash and friction Mech Mach Theory 46 466-1149
  • [10] Li W(2016)Evaluation of optimum profile modification curves of profile shifted spur gears based on vibration responses Mech Syst Signal Process 70–71 1131-318
12345678910