Spheroidization of Fe-Based Powders in Plasma Jet of DC Arc Plasma Torch and Application of These Powders in Selective Laser Melting

被引：7

作者：

Samokhin A.V. ^{[1
]}

Fadeev A.A. ^{[1
]}

Alekseev N.V. ^{[1
]}

Sinaysky M.A. ^{[1
]}

Sufiyarov V.S. ^{[2
]}

Borisov E.V. ^{[2
]}

Korznikov O.V. ^{[3
]}

Fedina T.V. ^{[3
]}

Vodovozova G.S. ^{[3
]}

Baryshkov S.V. ^{[3
]}

机构：

[1] Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences, Moscow

[2] Peter the Great St. Petersburg Polytechnic University, St. Petersburg

[3] PAO Severstal, Cherepovets, 162608, Vologda oblast

来源：

Inorganic Materials: Applied Research | 2020年 / 11卷 / 03期

关键词：

DC arc plasma torch; powders; selective laser melting; spheroidization;

D O I：

10.1134/S2075113320030417

中图分类号：

学科分类号：

摘要：

Abstract: Spheroidization of Fe and steel powders in a plasma stream of an DC arc plasma torch is investigated. The possibility of obtaining a product with a spherical particle content of up to 100% is established. The fluidity of the best samples of obtained powder is 13–20 s with a fluidity of the feedstock of 39 s. The bulk density of the initial powder (3.05 g/cm3) during the plasma treatment increases to 4.1–4.4 g/cm3. The nanofraction content in spheroidized powders varied from 0 to 75 wt % and it depends mainly on the enthalpy of the plasma stream, consumption of raw materials, and the organization of the flow of the plasma-forming gas in the discharge channel of the plasma torch. It is established that Fe powders spheroidized in plasma can be used in selective laser melting technology to obtain compact samples whose density reaches 7.86 g/cm3. © 2020, Pleiades Publishing, Ltd.

引用

页码：579 / 585

页数：6

共 35 条

[21] SHS Produced TiB2-Si Powders for Selective Laser Melting of Ceramic-Based Composite [J].

Liu, Le ;

Aydinyan, Sofiya ;

Minasyan, Tatevik ;

Hussainova, Irina .

APPLIED SCIENCES-BASEL, 2020, 10 (09)

[22] Production of Cylindrical Specimens Based on the Ni-Ti System by Selective Laser Melting from Elementary Powders [J].

Vieira de Oliveira, Rebeca ;

Pereira de Lima, Ygor ;

Hoisler Sallet, Eduardo ;

Abilio Correa Goncalves, Danilo ;

Vieira Le Senechal, Naiara ;

Alves Oliveira Melo, Edilainea ;

Teixeira, Rodolfo ;

Freitas Rodrigues, Patricia ;

Inforcatti Neto, Paulo ;

Vicente Lopes da Silva, Jorge ;

Brandao, Luiz Paulo ;

dos Santos Paula, Andersan .

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2021, 30 (07) :5477-5490

[23] Powder bed selective laser process (sintering/melting) applied to tailored calcium phosphate-based powders [J].

Navarrete-Segado, P. ;

Frances, C. ;

Tourbin, M. ;

Tenailleau, C. ;

Duployer, B. ;

Grossin, D. .

ADDITIVE MANUFACTURING, 2022, 50

[24] Production of Cylindrical Specimens Based on the Ni-Ti System by Selective Laser Melting from Elementary Powders [J].

Rebeca Vieira de Oliveira ;

Ygor Pereira de Lima ;

Eduardo Hoisler Sallet ;

Danilo Abílio Corrêa Gonçalves ;

Naiara Vieira Le Sénèchal ;

Edilainea Alves Oliveira Melo ;

Rodolfo Teixeira ;

Patrícia Freitas Rodrigues ;

Paulo Inforçatti Neto ;

Jorge Vicente Lopes da Silva ;

Luiz Paulo Brandao ;

Andersan dos Santos Paula .

Journal of Materials Engineering and Performance, 2021, 30 :5477-5490

[25] Manufacture of Fe-Al cube part with a sandwich structure by selective laser melting directly from mechanically mixed Fe and Al powders [J].

Song, Bo ;

Dong, Shujuan ;

Liao, Hanlin ;

Coddet, Christian .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2013, 69 (5-8) :1323-1330

[26] Fe-based metallic glass reinforced FeCoCrNiMn high entropy alloy through selective laser melting [J].

Li, Ning ;

Wu, Shixing ;

Ouyang, Di ;

Zhang, Jianji ;

Liu, Lin .

JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 822

[27] Microstructure and mechanical properties of Fe-based bulk metallic glass composites fabricated by selective laser melting [J].

Zou, Yongming ;

Qiu, Zhaoguo ;

Tan, Chaolin ;

Wu, Yaosha ;

Li, Kefeng ;

Zeng, Dechang .

JOURNAL OF NON-CRYSTALLINE SOLIDS, 2020, 538

[28] The effect of ultrasonic field on the microstructure and corrosion behavior of Fe-based amorphous coating applied to selective laser melting [J].

Taheri, Morteza ;

Razavi, Mansour .

MATERIALS RESEARCH EXPRESS, 2023, 10 (07)

[29] Structural evolutions in 3D-printed Fe-based metallic glass fabricated by selective laser melting [J].

Ouyang, Di ;

Xing, Wei ;

Li, Ning ;

Li, Yicheng ;

Liu, Lin .

ADDITIVE MANUFACTURING, 2018, 23 :246-252

[30] Insight into micro-cracking in 3D-printed Fe-based BMGs by selective laser melting [J].

Xing, Wei ;

Ouyang, Di ;

Li, Ning ;

Liu, Lin .

INTERMETALLICS, 2018, 103 :101-106

← 1 2 3 4 →