Effects of coal moisture control and coal briquette technology on structure and reactivity of cokes

被引:17
作者
Cui P. [1 ]
Qu K.-L. [1 ]
Ling Q. [1 ]
Cheng L.-Y. [2 ]
Cao Y.-P. [2 ]
机构
[1] Anhui Key Laboratory of Coal Clean Conversion and Utilization, School of Chemistry and Chemical Engineering, Anhui University of Technology, Maanshan
[2] Baoshan Iron and Steel Co., coking plants, Shanghai
基金
中国国家自然科学基金;
关键词
coal briquette; coal moisture control; coke; superposition effect;
D O I
10.3103/S1068364X15050075
中图分类号
学科分类号
摘要
In this work, the influences of coal moisture control (CMC) and coal briquette technology on structure and reactivity of cokes were investigated by adding a certain proportion of briquette into raw coal with different moisture. The coking experiments were carried out in a tested coke-oven of 70 kg, and the properties of as-obtained coke were analyzed by X-ray diffraction (XRD), scanning electron microscope (SEM) and so on. The coke reactivity index (CRI), coke strength after reaction (CSR) and the optical texture of different cokes were also measured. The results indicated that the two technologies both can improve the structure of coke and reduce the reactivity of coke. The improved coke properties can be attributed to forming a more compact microcrystalline structure of coke to enhance its pore wall structure, its optical texture index (OTI) and its graphitization degree. Noticeably, the introduction of CMC technology in coal briquette process can produce the superposition effect to the great improvement of the coke properties. In addition, the results also indicated that the introduction of CMC technology in coal briquette process can reduce the sulfur content of coke due to the overflowed sulfur in the form of gas during the coking, and can almost be equivalent to substitute 10% briquette in coal briquette process in the improvement of the CRI and CSR from coke, implying the reduced amount of briquette to save coal resources. © 2015, Allerton Press, Inc.
引用
收藏
页码:162 / 169
页数:7
相关论文
共 15 条
[1]  
Schobert H.H., Song C., Chemicals and materials from coal in the 21st century, Fuel, 81, pp. 15-32, (2002)
[2]  
Li J., Development of coal moisture control and it’s application in coking plant, Coal Chem. Ind., 1, pp. 34-36, (2005)
[3]  
Diez M.A., Alvarez R., Barriocanal C., Coal for metallurgical coke production: predictions of coke quality and future requirements for coke making, Int J. Coal Geol., 50, pp. 389-412, (2002)
[4]  
Pis J.J., Menendez J.A., Parra J.B., Alvarez R., Relation between texture and reactivity in metallurgical cokes obtained from coal using petroleum coke as additive, Fuel Process Technol., 77-78, 20, pp. 199-205, (2002)
[5]  
Kenji N., Yoshiaki N., Yuuichi Y., Development of dry-cleaned and agglomerated precompaction system (DAPS) for metallurgical coke making, Nippon Steel Technical Report., 94, pp. 42-46, (2006)
[6]  
Meikap B.C., Purohit N.K., Mahadevan V., Effect of microwave pretreatment of coal for improvement of rheological characteristics of coal-water slurries, J. Colloid Interface Sci., 281, pp. 225-235, (2005)
[7]  
Bao J., Xue G., Chang H., Influence of coal charge moisture on coke-making process and coke quality, Fuel Chem. Process., 41, 3, pp. 11-13, (2010)
[8]  
Wang J., Brief Introduction to coke making process with Briquetted coal in our country, Fuel Chem. Process., 1, pp. 7-10, (2002)
[9]  
Seiji N., Takashi A., Kenji K., Coal blending theory for dry coal charging process, Fuel, 83, 13, pp. 1771-1776, (2004)
[10]  
Zhu D., Chen H., Coal moisture control process and its economic analysis, Fuel Chem. Process., 35, 2, pp. 7-9, (2004)