Optimal design of a new spatial 3-DOF parallel robot with respect to a frame-free index

被引：0
作者：
JinSong Wang
XinJun Liu
Chao Wu
机构：
[1] Tsinghua University,Department of Precision Instruments
来源：
Science in China Series E: Technological Sciences | 2009年 / 52卷
关键词：
optimal design; parallel robots; index; transmission angle; motion/force transmission;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Optimal design is one of the most important issues in robots. Since the very beginning, the concepts of the Jacobian matrix, manipulability and condition number, which are used successfully in the field of serial robots, have been applied to parallel robots. Unlike serial robots, parallel robots are good for motion/force transmission. Their performance evaluation and design should be correspondingly different. This paper is an attempt to optimally design a novel spatial three-degree-of-freedom (3-DOF) parallel robot by using the concept of motion/force transmission. Accordingly, three indices are defined. The suggested indices are independent of any coordinate frame and could be applied to the analysis and design of a parallel robot whose singularities can be identified wholly by using the relative angle between the output and adjacent links, and by using the relative angle between the input and adjacent links.
引用
收藏
页码：986 / 999
页数：13
相关论文
共 51 条
  • [1] Huang Z.(2003)Type synthesis of symmetrical lower-mobility parallel mechanisms using the constraint-synthesis method Int J Robot Res 22 59-79
  • [2] Li Q. C.(2006)A novel design and analysis of a 2-DOF compliant parallel micromanipulator for nanomanipulation IEEE Trans Automat Sci Eng 3 248-254
  • [3] Li Y.(1989)The optimum kinematic design of a spherical three-degree-of-freedom parallel manipulator J Mech Transm Autom Des 111 202-207
  • [4] Xu Q.(2002)Optimal design of CaPaMan (Cassino Parallel Manipulator) with a specified orientation workspace Robotica 20 159-166
  • [5] Gosselin C.(2006)Jacobian, manipulability, condition number, and accuracy of parallel robots ASME J Mech Des 128 199-206
  • [6] Angeles J.(1991)A global performance index for the kinematic optimization of robotic manipulators ASME J Mech Des 113 220-226
  • [7] Ottaviano E.(1932)Der uberstragungswinkel und seine bedeutung fur dar konstruieren periodischer getriebe Werksstattstechnik 26 61-65
  • [8] Ceccarelli M.(2002)Transmission angle in mechanisms Mech Mach Theory 37 175-195
  • [9] Merlet J. P.(1971)Link length bounds on the four bar chain J Eng Ind Trans ASME Ser B 93 287-293
  • [10] Gosselin C.(1974)Dimensional synthesis of linkage by multifactor optimization Mech Mach Theory 9 81-95
123456