Stability and fracture of plates with two edge cracks under tension

被引：0
作者：
M. S. Dyshel’
机构：
[1] National Academy of Sciences of Ukraine,S. P. Timoshenko Institute of Mechanics
来源：
International Applied Mechanics | 2006年 / 42卷
关键词：
stability; fracture; plate; edge crack; tension; strain; deflection; buckling stress;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The paper presents experimental results on the deformation, local buckling, and fracture of D16AT plates with two parallel edge cracks under tension. The distribution of strains and deflections over typical cross-sections and buckling modes are determined. The influence of the crack length and the distance between the cracks on the local buckling stresses and breaking stresses is studied. The effect of local buckling on the strength of the plate is evaluated
引用
收藏
页码：1303 / 1306
页数：3
相关论文
共 16 条
[1]  
Guz A. N.(1995)Deformation of plates with an edge crack in tension Int. Appl. Mech. 31 944-480
[2]  
Dyshel’ M. Sh.(1998)Effect of the ductility properties of the material on the stability and fracture of plates with an edge crack Int. Appl. Mech. 34 669-672
[3]  
Dyshel’ M. Sh.(1996)Tensile fracture of plates with an edge crack with allowance for preliminary local loss of stability Int. Appl. Mech. 32 128-131
[4]  
Dyshel’ M. Sh.(2002)Stability and fracture of plates with a central and an edge cracks under tension Int. Appl. Mech. 38 472-476
[5]  
Dyshel’ M. Sh.(2003)Stability of plates with an oblique edge crack under tension Int. Appl. Mech. 39 1081-1083
[6]  
Dyshel’ M. Sh.(2004)On some nonclassical problems of fracture mechanics taking into account the stresses along cracks Int. Appl. Mech. 40 937-941
[7]  
Guz A. N.(2005)On two-scale model of fracture mesomechanics of composites with cracks under compression Int. Appl. Mech. 41 582-585
[8]  
Guz A. N.(2001)Fracture and buckling of thin panels with edge crack in tension Theor. Appl. Fract. Mech. 37 57-60
[9]  
Guz A. N.(2004)Fracture and stability of materials and structural members with crack: Approaches and results Int. Appl. Mech. 40 1323-1359
[10]  
Dyshel’ M. Sh.(2004)Fracture of plates with an inclined edge crack under tension Int. Appl. Mech. 40 580-582
12