Forced vibration analysis of rotors with an open edge crack based on a continuous vibration theory

被引:0
作者
Alireza Ebrahimi
Mahdi Heydari
Mehdi Behzad
机构
[1] Sharif University of Technology,Department of Mechanical Engineering
[2] Worcester Polytechnic Institute,Department of Mechanical Engineering
来源
Archive of Applied Mechanics | 2017年 / 87卷
关键词
Continuous model; Cracked rotor; Forced vibration; Gravity force; Unbalance force;
D O I
暂无
中图分类号
学科分类号
摘要
In this paper, the forced vibration of a cracked rotor with an open edge crack has been studied by a new continuous model for flexural vibration of cracked rotors proposed in Ebrahimi et al. (J Sound Vib 333:3522–3535, 2014). The cracked rotor behavior under the external excitation of gravity and unbalance forces is presented. Since the governing equation is linear, using the superposition principle the responses of the cracked rotor to the gravity and unbalance forces are calculated separately. Then, the total response is calculated by summing these two responses. Each of these two responses is found by using a modified Galerkin method. The effect of the crack in the presence of the gravity and unbalance forces on the time response, frequency spectrum, frequency response curve and orbit diagram of the rotor is analyzed. Results can be used for the crack identification of rotors.
引用
收藏
页码:1871 / 1889
页数:18
相关论文
共 92 条
[21]  
Chu F(2012)Crack detection in shaft using lateral and torsional vibration measurements and analyses Mech. Eng. Res. 2 52-76
[22]  
Kulesza Z(2007)Identification of crack in a rotor system based on wavelet finite element method Finite Elem. Anal. Des. 43 1068-1081
[23]  
Sawicki JT(2006)A model-based identification method of transverse cracks in rotating shafts suitable for industrial machines Mech. Syst. Signal Process. 20 2112-2147
[24]  
AL-Shudeifat MA(2008)Hilbert–Huang transform for detection and monitoring of crack in a transient rotor Mech. Syst. Signal Process. 22 905-914
[25]  
Bouboulas AS(2013)Crack location identification of rotating rotor systems using operating deflection shape data Sci. China Technol. Sci. 56 1723-1732
[26]  
Anifantis NK(2008)Detection of two cracks in a rotor-bearing system using amplitude deviation curve J. Sound Vib. 314 457-464
[27]  
Tsai TC(2014)Rotor crack identification based on neural networks and modal data Meccanica 49 305-324
[28]  
Wang YZ(2001)Study on genetic algorithms based rotor crack detection for rotating machine Chin. J. Mech. Eng. 37 69-74
[29]  
Jun OS(2013)Crack detection in a rotor by operational deflection shape and kurtosis using laser vibrometer measurements J. Vib. Control 19 1227-1239
[30]  
Lu Z(2015)Nonlinear response prediction of cracked rotor based on EMD J. Frankl. Inst. 352 3378-3393