Water cooling keyhole gas tungsten arc welding of HSLA steel

被引：0
作者：
Wenfei Fan
Sansan Ao
Yifei Huang
Weidong Liu
Yang Li
Yueqiao Feng
Zhen Luo
Ben Wu
机构：
[1] Tianjin University,School of Materials Science and Engineering
[2] Tianjin University,undefined
[3] Collaborative Innovation Center of Advanced Ship and Deep-Sea Exploration,undefined
[4] Harbin Huade University,undefined
来源：
The International Journal of Advanced Manufacturing Technology | 2017年 / 92卷
关键词：
Keyhole gas tungsten arc welding; Water cooling; HSLA Q345; Numerical simulation; Mechanical properties; Microstructures;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Keyhole gas tungsten arc (K-TIG) welding with water cooling system was used to weld high-strength low-alloy steel of mid-thickness (thickness ranging 6–13 mm). Q345 plates of 8-mm thickness were jointed in a single pass without filler metal. The weld properties, including mechanical properties and microstructure, were analyzed. The maximum tensile strength of the weld was similar with that of the base metal, while the elongation and impact property of the weldment were decreased compared with the base metal. The numerical simulation result revealed that water cooling method used in K-TIG welding is greatly helpful in reducing the volume of the welding pool due to the enhanced cooling effect. Additionally, improved holding power of the welding pool can be obtained due to the increased surface tension.
引用
收藏
页码：2207 / 2216
页数：9
相关论文
共 83 条
[1]  
Lathabai S(2001)Comparison of keyhole and conventional gas tungsten arc welds in commercially pure titanium Mater Sci Eng A 299 81-93
[2]  
Jarvis BL(2008)Keyhole gas tungsten arc welding of commercially pure zirconium Sci Technol Weld Join 13 573-581
[3]  
Barton KJ(2015)Keyhole gas tungsten arc welding of AISI 316L stainless steel Mater Des 85 24-31
[4]  
Lathabai S(1941)Mathematical theory of heat distribution during welding and cutting Weld J 20 220-234
[5]  
Jarvis BL(1946)Theory of moving sources of heat and its applications to metal treatments Trans ASME 68 849-866
[6]  
Barton KJ(2016)Mechanical properties of 2219-Al components produced by additive manufacturing with TIG Int J Adv Manuf Technol 86 479-485
[7]  
Feng YQ(2014)Experimental investigation of the effect of vibration on mechanical properties of 304 stainless steel welded parts Int J Adv Manuf Technol 70 1113-1124
[8]  
Luo Z(2000)Development of keyhole mode gas tungsten arc welding process Sci Technol Weld Join 5 21-1718
[9]  
Liu ZM(2015)Improving formability of laser welded automotive dual phase steels with local cooling Sci Technol Weld Join 20 145-154
[10]  
Li Y(2014)Microstructural characterization of liquid nitrogen cooled alloy 718 fusion zone J Mater Process Technol 214 3141-3149
123456789