A Comparative Analysis on Microstructure and Fracture Mechanism of X100 Pipeline Steel CGHAZ Between Laser Welding and Arc Welding

被引:0
作者
Xiaonan Qi
Hongshuang Di
Qian Sun
Xiaonan Wang
Xiaming Chen
Yuan Gao
Zhenguang Liu
机构
[1] The State Key Laboratory of Rolling and Automation of Northeastern University,School of Iron and Steel
[2] Soochow University,School of Materials Science and Engineering
[3] Jiangsu University of Science and Technology,undefined
来源
Journal of Materials Engineering and Performance | 2019年 / 28卷
关键词
fracture mechanism; microstructure; pipeline steel; toughness; welding thermal simulation;
D O I
暂无
中图分类号
学科分类号
摘要
The objective of this study is to compare and contrast the differences in microstructure and fracture mechanism between CGHAZ of laser welding and submerged arc welding in X100 pipeline steel. The single-pass welding thermal simulation test of laser welding and submerged arc welding was carried out in MMS-200 thermal simulation test machine using self-made fixtures. The results indicated that the microstructure of laser welding CGHAZ and submerged arc welding CGHAZ was lath martensite and granular bainite, respectively. The impact energy of laser welding CGHAZ was 27 J, and the fracture mode was ductile fracture; the impact energy of submerged arc welding CGHAZ was 7.7 J, and the fracture mode was brittle fracture. The nucleation and propagation mechanism of cracks in different welding modes was established. Microcracks nucleated at the position of dislocation accumulation and remained austenite suppressed crack nucleation in laser welding CGHAZ. The nucleation site was at the M–A constituents in submerged arc welding CGHAZ. The main crack of laser welding CGHAZ was formed by one or a small number of microcracks. The main crack in submerged arc welding CGHAZ was formed by a large number of microcracks. The difference between crack nucleation and propagation mechanism is the reason why the impact energy of laser welding CGHAZ is higher than of submerged arc welding CGHAZ.
引用
收藏
页码:7006 / 7015
页数:9
相关论文
共 50 条
[31]   Influence of microstructure on stress corrosion cracking of X100 pipeline steel in carbonate/bicarbonate solution [J].
Song Longfei ;
Liu Zhiyong ;
Li Xiaogang ;
Guo Xingpeng ;
Zhang Yinxiao ;
Wei Wu .
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 17 :150-165
[32]   Relationships among crystallographic texture, fracture behavior and Charpy impact toughness in API X100 pipeline steel [J].
Yang, Xiao-Long ;
Xu, Yun-Bo ;
Tan, Xiao-Dong ;
Wu, Di .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 641 :96-106
[33]   Narrow Gap Welding of X80 Steel Using Laser-CMT Hybrid Welding with Misaligned Laser and Arc [J].
Zheng, Bofang ;
Li, Yang ;
Ao, Sansan ;
Zhang, Xianlong ;
Zhang, Di ;
Manladan, Sunusi Marwana ;
Luo, Zhen ;
Yang, Yue ;
Bi, Yuanbo .
CRYSTALS, 2022, 12 (06)
[34]   A comparative study on microstructure and mechanical properties of HG785D steel joint produced by hybrid laser-MAG welding and laser welding [J].
Liu, Fuyun ;
Tan, Caiwang ;
Gong, Xiangtao ;
Wu, Laijun ;
Chen, Bo ;
Song, Xiaoguo ;
Feng, Jicai .
OPTICS AND LASER TECHNOLOGY, 2020, 128
[35]   Welding design of API 5L X65 pipeline steel: Effects of robotic hybrid laser arc welding versus GMAW on fracture toughness evaluated by SENT tests in air and hydrogen [J].
Safyari, Mahdieh ;
Moshtaghi, Masoud .
MATERIALS & DESIGN, 2025, 254
[36]   Effect of root welding heat input on microstructure evolution and fracture mechanism in intercritically reheat-coarse grained heat-affected zone of X80 pipeline steel [J].
Qi, Xiaonan ;
Huan, Pengcheng ;
Wang, Xiaonan ;
Liu, Zhenguang ;
Shen, Xinjun ;
Gao, Yuan ;
Di, Hongshuang .
MATERIALS TODAY COMMUNICATIONS, 2022, 31
[37]   Effect of heat input on weld microstructure and toughness of laser-arc hybrid welding of martensitic stainless steel [J].
Hao, Kangda ;
Zhang, Chen ;
Zeng, Xiaoyan ;
Gao, Ming .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2017, 245 :7-14
[38]   A comparative study on the microstructure and properties of copper joint between MIG welding and laser-MIG hybrid welding [J].
Zhang, Lin-Jie ;
Bai, Qing-Lin ;
Ning, Jie ;
Wang, An ;
Yang, Jian-Nan ;
Yin, Xian-Qing ;
Zhang, Jian-Xun .
MATERIALS & DESIGN, 2016, 110 :35-50
[39]   Effects of laser-arc hybrid welding on microstructure and mechanical properties of dissimilar steel joint [J].
Yang, Shoubing ;
Wang, Dongxu ;
Yang, Li ;
Zhang, Fulong ;
Zhang, Chi ;
Zhou, Bin ;
Liu, Chaojie ;
Huang, Genzhe .
OPTIK, 2022, 268
[40]   Comparative study on metallurgical and mechanical properties of laser and laser-arc-hybrid welding of HSLA steel [J].
Oyyaravelu, Ramachandran ;
Kuppan, Palaniyandi ;
Arivazhagan, Natarajan .
MATERIALS TODAY-PROCEEDINGS, 2018, 5 (05) :12693-12705