Effects of high pressure roller grinding on size distribution of vanadium-titanium magnetite concentrate particles and improvement of green pellet strength

被引：11
作者：
Chen F. [1 ]
Guo Y.-F. [1 ]
Jiang T. [1 ]
Zheng F.-Q. [1 ]
Wang S. [1 ]
Yang L.-Z. [1 ]
机构：
[1] School of Minerals Processing and Bioengineering, Central South University, Changsha, 410083, Hunan
来源：
Journal of Iron and Steel Research International | 2017年 / 24卷 / 3期
关键词：
Green pellet strength; High pressure roller grinding; Particle packing; Size distribution; Size ratio;
D O I：
10.1016/S1006-706X(17)30039-0
中图分类号：
学科分类号：
摘要：
The vanadium-titanium magnetite concentrate from Panxi region of China was pretreated by high pressure roller grinding (HPRG) and then used in pelletization. Size distribution change of the vanadium-titanium magnetite concentrate after HPRG and the improvement of its green pellet strength were investigated. The results indicated that, besides the increase of fine particles, the vanadium-titanium magnetite concentrate after HPRG had a smaller size ratio of fine particle to coarse particle of 0.126, meaning a lower porosity, compared with the size ratio of raw material of 0.157. The concentrate particles were more closely packed when there was a smaller size ratio of fine particle to coarse particle. The particle packing in the green pellets was closer after HPRG, which strengthened the green pellets with an average drop number of 5.1 (drop height of 0.5 m) and average compressive strength of 13.1 N per pellet of 11 mm in diameter. © 2017 Central Iron and Steel Research Institute
引用
收藏
页码：266 / 272
页数：6
相关论文
共 25 条
  • [1] Fu J., Jiang T., Zhu D., Sintering and Pelletization, (1996)
  • [2] Yuan Z., Guo X., Yan Y., Han Y., J. Northeast. Univ. Nat. Sci., 33, pp. 124-127, (2012)
  • [3] Wang C., Xiong S., Sintering and Pelletizing, 27, pp. 12-15, (2002)
  • [4] Zhu D., Tang Y., Mendes V., Pan J., Zhai Y., J. Univ. Sci. Technol. Beijing, 31, pp. 30-35, (2009)
  • [5] Zhu D., Chen D., Pan J., J. Cent. South Univ. Sci. Technol., 42, pp. 1825-1832, (2011)
  • [6] Zhu D., Tang Y., Mendes V., Pan J., Zhai Y., Metal Mine, 4, pp. 67-70, (2008)
  • [7] Guo Y., Weng W., Jiang T., Liu S., Qiu G., Metal Mine, 5, pp. 92-95, (2012)
  • [8] Xiong H., Sintering and Pelletizing, 36, pp. 23-27, (2011)
  • [9] Zhu D., Pan J., Qiu G., Clout J., Wang C., Guo Y., Hu C., ISIJ Int., 44, pp. 310-315, (2004)
  • [10] Van der Meer F.P., Gruendken A., Miner. Eng., 23, pp. 663-669, (2010)
123