Performance of cemented carbide tools with microgrooves in Ti-6Al-4V titanium alloy cutting

被引：1
作者：
Yinfei Yang
Yongsheng Su
Liang Li
Ning He
Wei Zhao
机构：
[1] Nanjing University of Aeronautics and Astronautics,
来源：
The International Journal of Advanced Manufacturing Technology | 2015年 / 76卷
关键词：
Cemented carbide tools; Ti-6Al-4V titanium alloy; Microgrooves; Cutting performance;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Microgroove array with different parameters was fabricated on the rake face of the cemented carbide tools by a fiber laser. The experiments of orthogonal cutting of Ti-6Al-4V titanium alloy were carried out by cutting tools with microgrooves. The effect of microgrooves of different parameters on cutting performance of tool-chip interface was investigated under dry cutting and cryogenic minimum quantity lubrication (CMQL) conditions. Results show that cutting tools with microgrooves combined with CMQL can improve adhesion and reduce the thrust force and average friction coefficient of the rake face of cemented carbide tools.
引用
收藏
页码：1731 / 1738
页数：7
相关论文
共 96 条
  • [1] Ezugwu EO(1997)Titanium alloys and their machinability—a review J Mater Process Technol 68 262-274
  • [2] Wang ZM(2001)Machining of aerospace titanium alloys Robot Comput-Integr Manuf 17 99-106
  • [3] Nabhani F(2003)An overview of the machinability of aeroengine alloys J Mater Process Technol 134 233-253
  • [4] Ezugwu EO(2006)Examining the role of cutting fluids in machining and efforts to address associated environmental/health concerns Mach Sci Technol 10 23-58
  • [5] Bonney J(1999)New hard/lubricant coating for dry machining Surf Coat Technol 113 286-292
  • [6] Yamane Y(2003)Dry and semi-dry machining using finely crystallized diamond coating cutting tools Surf Coat Technol 174 992-995
  • [7] Adler DP(1997)Dry cutting CIRP Ann-Manuf Technol 46 519-526
  • [8] Hii WWS(2000)Dry machining: machining of the future J Mater Process Technol 101 287-291
  • [9] Michalek DJ(2006)The influence of minimum quantity of lubrication (MQL) on cutting temperature, chip and dimensional accuracy in turning AISI-1040 steel J Mater Process Technol 171 93-99
  • [10] Sutherland JW(2009)Study on orthogonal turning of titanium alloys with different coolant supply strategies Int J Adv Manuf Technol 42 621-632
12345678910