Effect of Post Weld Heat Treatment on Mechanical and Corrosion Behaviors of NiTi and Stainless Steel Laser-Welded Wires

被引：1

作者：

G. R. Mirshekari

A. Saatchi

A. Kermanpur

S. K. Sadrnezhaad

机构：

[1] Isfahan University of Technology,Department of Materials Engineering

[2] University of Wisconsin-Madison,Department of Materials Science and Engineering

[3] Sharif University of Technology,Department of Materials Science and Engineering

来源：

Journal of Materials Engineering and Performance | 2016年 / 25卷

关键词：

corrosion behavior; laser welding; mechanical properties; NiTi shape memory alloy; post weld heat treatment; stainless steel;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Effects of post weld heat treatment (PWHT) on mechanical properties and corrosion behavior of NiTi shape memory wire, laser welded to the 304 stainless steel wire were investigated. The results showed that PWHT at 200 °C increased corrosion resistance and tensile strength of the joint up to ~1.8 times that of the as-weld joint, with no heat treatment. On the contrary, precipitation of neoteric intermetallic compounds like Fe2Ti, Cr2Ti, FeNi, Ni3Ti, and Ti2Ni in the welded region deteriorated these properties, when PWHT was conducted at 400 °C. Due to the vital effects of the PWHT performed after the laser welding, careful control of the PWHT temperature was found to be a prerequisite for achievement of desirable properties in the dissimilar NiTi-304 stainless steel laser-welded wires.

引用

页码：2395 / 2402

页数：7

共 50 条

[41] Influence of heat treatment on the fatigue life of a laser-welded NiTi alloy wire
Yan, X. J.
Yang, D. Z.
Liu, X. P.
MATERIALS CHARACTERIZATION, 2007, 58 (03) : 262 - 266
[42] Effect of post weld heat treatment on the interface microstructure of explosively welded titanium/stainless steel composite clad
Sartangi, Pezhman Farhadi
Mousavi, Seiyed Ali Asghar Akbari
ADVANCED WELDING AND MICRO JOINING / PACKAGING FOR THE 21ST CENTURY, 2008, 580-582 : 29 - 32
[43] Influence of Nickel on the Microstructure, Mechanical Properties, and Corrosion Resistance of Laser-Welded Super-Duplex Stainless Steel
da Cruz Junior, E. J.
Gallego, J.
Settimi, A. G.
Gennari, C.
Zambon, A.
Ventrella, V. A.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2021, 30 (04) : 3024 - 3032
[44] Effect of post-weld heat treatment on mechanical properties and microstructure in electric arc welded mild steel joints
Aninda, Rayan Karim
Karobi, Shazrina Mariam
Shariar, Redwan
Rahman, Md. Musfiqur
Rabby, Md Insiat Islam
JOURNAL OF ENGINEERING RESEARCH, 2024, 12 (02): : 210 - 215
[45] Influence of Nickel on the Microstructure, Mechanical Properties, and Corrosion Resistance of Laser-Welded Super-Duplex Stainless Steel
E. J. da Cruz Junior
J. Gallego
A. G. Settimi
C. Gennari
A. Zambon
V. A. Ventrella
Journal of Materials Engineering and Performance, 2021, 30 : 3024 - 3032
[46] Effect of post-weld heat treatment on microstructure, crystallography, and mechanical properties of laser beam welded AISI 904L super austenitic stainless steel
Kose, Ceyhun
ENGINEERING FAILURE ANALYSIS, 2024, 158
[47] Effect of Post-Weld Heat Treatment on the Corrosion Behavior of Resistance Spot Welded Super Duplex Stainless UNS S 32750
Shin, Byung-hyun
Park, Sanghyup
Park, Junghyun
Kim, Dohyung
Hwang, Myoungwon
Chung, Wonsub
INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2019, 14 (03): : 2430 - 2441
[48] Dissimilar Laser Beam Welding of AISI 420 Martensitic Stainless Steel to AISI 2205 Duplex Stainless Steel: Effect of Post-Weld Heat Treatment on Microstructure and Mechanical Properties
Ceyhun Köse
Journal of Materials Engineering and Performance, 2021, 30 : 7417 - 7448
[49] The effect of preheat & post weld heat treatment on the laser weldability of AISI 420 martensitic stainless steel
Kose, Ceyhun
Kacar, Ramazan
MATERIALS & DESIGN, 2014, 64 : 221 - 226
[50] Effect of post weld heat treatment and heat input on the microstructure and mechanical properties of plasma arc welded AISI 410S ferritic stainless steel
Kose, Ceyhun
Topal, Ceyhun
MATERIALS RESEARCH EXPRESS, 2019, 6 (06):

← 1 2 3 4 5 →