Effect of Post Weld Heat Treatment on Mechanical and Corrosion Behaviors of NiTi and Stainless Steel Laser-Welded Wires

被引：1

作者：

G. R. Mirshekari

A. Saatchi

A. Kermanpur

S. K. Sadrnezhaad

机构：

[1] Isfahan University of Technology,Department of Materials Engineering

[2] University of Wisconsin-Madison,Department of Materials Science and Engineering

[3] Sharif University of Technology,Department of Materials Science and Engineering

来源：

Journal of Materials Engineering and Performance | 2016年 / 25卷

关键词：

corrosion behavior; laser welding; mechanical properties; NiTi shape memory alloy; post weld heat treatment; stainless steel;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Effects of post weld heat treatment (PWHT) on mechanical properties and corrosion behavior of NiTi shape memory wire, laser welded to the 304 stainless steel wire were investigated. The results showed that PWHT at 200 °C increased corrosion resistance and tensile strength of the joint up to ~1.8 times that of the as-weld joint, with no heat treatment. On the contrary, precipitation of neoteric intermetallic compounds like Fe2Ti, Cr2Ti, FeNi, Ni3Ti, and Ti2Ni in the welded region deteriorated these properties, when PWHT was conducted at 400 °C. Due to the vital effects of the PWHT performed after the laser welding, careful control of the PWHT temperature was found to be a prerequisite for achievement of desirable properties in the dissimilar NiTi-304 stainless steel laser-welded wires.

引用

页码：2395 / 2402

页数：7

共 50 条

[1] Effect of Post Weld Heat Treatment on Mechanical and Corrosion Behaviors of NiTi and Stainless Steel Laser-Welded Wires
Mirshekari, G. R.
Saatchi, A.
Kermanpur, A.
Sadrnezhaad, S. K.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2016, 25 (06) : 2395 - 2402
[2] Effect of post-weld heat-treatment on the oxide film and corrosion behaviour of laser-welded shape memory NiTi wires
Chan, C. W.
Man, H. C.
Yue, T. M.
CORROSION SCIENCE, 2012, 56 : 158 - 167
[3] Effect of Post-Weld Heat-Treatment on the Stress-Corrosion Cracking Behaviour of Laser-Welded Shape Memory NiTi Wires in Hanks' Solution
Chan, Chi-Wai
Man, Hau-Chung
NANOSCIENCE AND NANOTECHNOLOGY LETTERS, 2015, 7 (03) : 276 - 280
[4] Reduction of environmentally induced cracking of laser-welded shape memory NiTi wires via post-weld heat-treatment
Chan, C. W.
Man, H. C.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 588 : 388 - 394
[5] Effect of PWHT on Laser-Welded Duplex Stainless Steel The effects of postweld heat treatments on the microstructure, tensile behavior, and corrosion resistance of laser-welded duplex stainless steel were investigated
Magalhaes, A. S.
Magalhaes, C. H. X. M.
De Lima, M. S. F.
Cruz, J.
Godefroid, L. B.
Bertazzoli, R.
De Faria, G. L.
WELDING JOURNAL, 2020, 99 (07)
[6] Effects of post-weld heat treatment on the microstructure and mechanical properties of laser-welded NiTi/304SS joint with Ni filler
Chen, Yuhua
Sun, Songwei
Zhang, Timing
Zhou, Xingwen
Li, Shuhan
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 771
[7] EFFECT OF HEAT INPUT AND POST-WELD HEAT TREATMENT ON THE MECHANICAL AND METALLURGICAL CHARACTERISTICS OF LASER-WELDED MARAGING STEEL JOINTS
Karthikeyan, R.
Saravanan, M.
Singaravel, B.
Sathiya, P.
SURFACE REVIEW AND LETTERS, 2017, 24 (07)
[8] Influence of Post-Weld Annealing on Transformation Behavior and Mechanical Properties of Laser-Welded NiTi Alloy Wires
Xiaojun Yan
Yuli Ge
Journal of Materials Engineering and Performance, 2014, 23 : 3474 - 3479
[9] Influence of Post-Weld Annealing on Transformation Behavior and Mechanical Properties of Laser-Welded NiTi Alloy Wires
Yan, Xiaojun
Ge, Yuli
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2014, 23 (10) : 3474 - 3479
[10] Effect of Post-weld Heat Treatment on Microstructure and Properties of 6061 Aluminum Alloy Laser-Welded Joints
Jian, Haigen
Fang, Wu
Liu, Yi
Yang, Man
Wu, Jiangyao
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2025,

← 1 2 3 4 5 →