Strong Anisotropic Effects of p-Type Bi2Te3 Element on the Bi2Te3/Sn Interfacial Reactions

被引：0
作者：
Shan Ye
Jen-Dong Hwang
Chih-Ming Chen
机构：
[1] National Chung Hsing University,Department of Chemical Engineering
[2] Industrial Technology Research Institute,Material & Chemical Research Laboratory
来源：
Metallurgical and Materials Transactions A | 2015年 / 46卷
关键词：
Solder Joint; Bi2Te3; Zone Melting; SnTe; Bismuth Telluride;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The p-type Bi2Te3 thermoelectric materials made by zone-melting method exhibit high anisotropy in the mechanical/thermoelectric properties due to unidirectional crystal growth. This unidirectional crystal structure also has a strong effect on the Sn/p-Bi2Te3 interfacial reactions. Stripe-like Sn3Sb2 phase precipitated in the SnTe phase in a direction approximately perpendicular or parallel to the Sn/p-Bi2Te3 interface depending upon the p-Bi2Te3 crystal orientation. Such anisotropic growth behavior of the Sn3Sb2 phase significantly affected the SnTe phase growth.
引用
收藏
页码：2372 / 2375
页数：3
相关论文
共 54 条
[1]  
Chen G.(2003)undefined Int. Mater. Rev. 48 45-66
[2]  
Dresselhaus M.S.(2004)undefined Appl. Phys. Lett. 84 2436-38
[3]  
Dresselhaus G.(2005)undefined J. Cryst Growth 277 258-63
[4]  
Fleurial J.-P.(2009)undefined Appl. Phys. Lett. 88 092104-092104-3-58
[5]  
Caillat T.(2008)undefined Solid State Sci. 10 651-99
[6]  
Snyder G.J.(2007)undefined Scripta Mater. 56 97-25
[7]  
Jiang J.(2007)undefined Electrochem. Solid-State Lett. 10 P23-44
[8]  
Chen L.(2008)undefined J. Electron. Mater. 37 40-58
[9]  
Bai S.(2012)undefined J. Electron. Mater. 41 153-12
[10]  
Yao Q.(2013)undefined J. Alloys Compd. 553 106-18
123456