Estimation of the Performance Level of a Stretchable Plate Weakened by a Transverse Crack

被引:0
|
作者
N. F. Morozov
B. N. Semenov
P. E. Tovstik
机构
[1] St. Petersburg State University,
来源
Vestnik St. Petersburg University, Mathematics | 2019年 / 52卷
关键词
loss of plain deformation form; plate; finite element method;
D O I
暂无
中图分类号
学科分类号
摘要
We considered a rectilinear crack in a thin elastic plate in this work. Stretching the plate in the direction perpendicular to the crack, compressive stresses appear in the vicinity of the crack, which lead to stability loss in the plain form of plate equilibrium at a certain tension level. This study is aimed at clarifying whether the stability loss contributes to crack growth or leads to deformation stabilization. The stress state of the plate in the initial post-critical stage is studied. An approximate analytical solution is proposed. The finite element method is used for solving the problem of stretching a plate after stability loss. The effect of the loss of a plain deformation form when a plate with a central crack is stretched to the level of the stress state in the vicinity of the crack tip is estimated. An analysis of the stressed state in the vicinity of the tip of the central crack under uniaxial tension suggests that, at possible local buckling near the crack, there is an increase in stretching stresses in the vicinity of the crack tip and so the load leading to fracture decreases.
引用
收藏
页码:220 / 226
页数:6
相关论文
共 10 条
  • [1] Estimation of the Performance Level of a Stretchable Plate Weakened by a Transverse Crack
    Morozov, N. F.
    Semenov, B. N.
    Tovstik, P. E.
    VESTNIK ST PETERSBURG UNIVERSITY-MATHEMATICS, 2019, 52 (02) : 220 - 226
  • [2] FEA Simulation of Vibrating Cantilever Plate with Transverse Surface Crack
    Gori, Yatika
    Kumar, Pushpendra
    Patil, Pravin P.
    MATERIALS TODAY-PROCEEDINGS, 2017, 4 (09) : 9466 - 9470
  • [3] NUMERICAL AND EXPERIMENTAL ANALYSIS OF POST-CRITICAL DEFORMATION STATES IN A TENSIONED PLATE WEAKENED BY A CRACK
    Kopecki, Tomasz
    JOURNAL OF THEORETICAL AND APPLIED MECHANICS, 2010, 48 (01) : 45 - 70
  • [4] Fibre orientation structures and their effect on crack resistance of injection moulded transverse ribbed plate
    Hine, PJ
    Duckett, RA
    Caton-Rose, P
    Coates, PD
    PLASTICS RUBBER AND COMPOSITES, 2004, 33 (01) : 43 - 53
  • [5] Identification and severity estimation of a breathing crack in a plate via nonlinear dynamics
    H. Aftab
    U. Baneen
    A. Israr
    Nonlinear Dynamics, 2021, 104 : 1973 - 1989
  • [6] Detection and size estimation of crack in plate based on guided wave propagation
    Zima, Beata
    Kedra, Rafal
    MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2020, 142
  • [7] Identification and severity estimation of a breathing crack in a plate via nonlinear dynamics
    Aftab, H.
    Baneen, U.
    Israr, A.
    NONLINEAR DYNAMICS, 2021, 104 (03) : 1973 - 1989
  • [8] Higher-order crack tip fields for functionally graded material plate with transverse shear deformation
    Dianhui Hou
    Xiao Chong
    Guixiang Hao
    Yao Dai
    Applied Mathematics and Mechanics, 2016, 37 : 695 - 706
  • [9] Higher-order crack tip fields for functionally graded material plate with transverse shear deformation
    Dianhui HOU
    Xiao CHONG
    Guixiang HAO
    Yao DAI
    AppliedMathematicsandMechanics(EnglishEdition), 2016, 37 (06) : 695 - 706
  • [10] Higher-order crack tip fields for functionally graded material plate with transverse shear deformation
    Hou, Dianhui
    Chong, Xiao
    Hao, Guixiang
    Dai, Yao
    APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION, 2016, 37 (06) : 695 - 706