Carboborating of the Intermetallic Ti3Al-Based Alloys

被引：2

作者：

Ershova T.B. ^{[1
]}

Vlasova N.M. ^{[1
]}

Astapov I.A. ^{[1
]}

Teslina M.A. ^{[1
]}

机构：

[1] Institute of the Material Engineering, Far Eastern Branch, Russian Academy of Sciences, Khabarovsk

来源：

Inorganic Materials: Applied Research | 2019年 / 10卷 / 01期

关键词：

composite materials; composition; Keywords: intermetallic titanium; powder metallurgy; properties; strengthening phase; structure;

D O I：

10.1134/S2075113319010106

中图分类号：

学科分类号：

摘要：

Abstract—The intermetallic Ti3Al based alloys with the strengthening boride phases were obtained by the powder metallurgy methods; their composition, structure, and properties were studied. The optimum conditions for thermal treatment allowing obtaining the composite materials of the specified composition with the inclusions of the MAX phase were determined. © 2019, Pleiades Publishing, Ltd.

引用

页码：1 / 4

页数：3

共 17 条

[1]

Povarova K.B., Physico-chemical principles of production of thermically stable alloys based on transition metal aluminides (Part 2), Materialovedenie, 1, pp. 29-39, (2008)

[2]

Povarova K.B., Physico-chemical principles of production of thermically stable alloys based on transition metal aluminides (Part 1), Materialovedenie, 12, pp. 20-27, (2007)

[3]

Grinberg B.A., Ivanov M.A., Intermetallidy Ni, (2002)

[4]

Ermoshkin A.A., SHS-extrusion of multicomponent cathodes based on the Ti–C–Al and Ti–C–Al–Si systems for the deposition of vacuum-arc coatings, Extended Abstract of Cand. Sci., (2012)

[5]

Spencer C.B., Fiber Reinforced Ti 3 Sic 2 and Ti 2 Alc MAX Phase Composites, (2010)

[6]

Hu C., Zhang H., Li F., Huang Q., Bao Y., New phases’ discovery in MAX family, Int. J. Refract. Met. Hard Mater., 36, pp. 300-312, (2013)

[7]

Shu S., Tong C., Qiu F., Jiang Q., Effect of ceramic content on the compression properties of TiB<sub>2</sub>–Ti<sub>2</sub>AlC/TiAl composite, Metals, 5, pp. 2200-2209, (2015)

[8]

Ershova T.B., Vlasova N.M., Teslina M.A., Astapov I.A., Use of titanium chips for producing intermetallic alloys based on titanium aluminides, Materialovedenie, 5, pp. 18-23, (2016)

[9]

Stoloff N.S., Sikka V.K., Physical Metallurgy and Processing of Intermetallic Compounds, (1996)

[10]

Bohn R., Klassen T., Bormann R., Room temperature mechanical behavior of silicon-doped TiAl alloys with grain sizes in the nano- and submicron-range, Acta Mater., 49, pp. 299-311, (2001)

← 1 2 →