Effects of CsSnxPb1−xI3 Quantum Dots as Interfacial Layer on Photovoltaic Performance of Carbon-Based Perovskite Solar Cells

被引：0
作者：
Chi Zhang
Zhiyuan He
Xuanhui Luo
Rangwei Meng
Mengwei Chen
Haifei Lu
Yingping Yang
机构：
[1] Wuhan University of Technology,Department of Physics, School of Science
来源：
Nanoscale Research Letters | / 16卷
关键词：
Tin-doped perovskite quantum dots; Photovoltaic performance; Carbon-based perovskite solar cells;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
In this work, inorganic tin-doped perovskite quantum dots (PQDs) are incorporated into carbon-based perovskite solar cells (PSCs) to improve their photovoltaic performance. On the one hand, by controlling the content of Sn2+ doping, the energy level of the tin-doped PQDs can be adjusted, to realize optimized band alignment and enhanced separation of photogenerated electron–hole pairs. On the other hand, the incorporation of tin-doped PQDs provided with a relatively high acceptor concentration due to the self-p-type doping effect is able to reduce the width of the depletion region near the back surface of the perovskite, thereby enhancing the hole extraction. Particularly, after the addition of CsSn0.2Pb0.8I3 quantum dots (QDs), improvement of the power conversion efficiency (PCE) from 12.80 to 14.22% can be obtained, in comparison with the pristine device. Moreover, the experimental results are analyzed through the simulation of the one-dimensional perovskite/tin-doped PQDs heterojunction.
引用
收藏
相关论文
共 291 条
[1]  
Rong YG(2018)Challenges for commercializing perovskite solar cells Science 361 eaat8235-381
[2]  
Hu Y(2020)Understanding of carrier dynamics, heterojunction merits and device physics: towards designing efficient carrier transport layer-free perovskite solar cells Chem Soc Rev 49 354-6917
[3]  
Mei AY(2017)Understanding the physical properties of hybrid perovskites for photovoltaic applications Nat Rev Mater 2 17042-313
[4]  
Tan HR(2019)Electronic traps and their correlations to perovskite solar cell performance via compositional and thermal annealing controls ACS Appl Mater Interfaces 11 6907-9393
[5]  
Saidaminov MI(2018)Synergistic combination of semiconductor quantum dots and organic-inorganic halide perovskites for hybrid solar cells Coord Chem Rev 374 279-8699
[6]  
Seok SI(2015)The importance of moisture in hybrid lead halide perovskite thin film fabrication ACS Nano 9 9380-418
[7]  
McGehee MD(2019)Current progress in interfacial engineering of carbon-based perovskite solar cells J Mater Chem A 7 8690-566
[8]  
Sargent EH(2018)Low-dimensional perovskite interlayer for highly efficient lead-free formamidinium tin iodide perovskite solar cells Nano Energy 49 411-1976
[9]  
Han HW(2019)Cesium-lead based inorganic perovskite quantum-dots as interfacial layer for highly stable perovskite solar cells with exceeding 21% efficiency Nano Energy 60 557-526
[10]  
Liao JF(2019)Quantum dots supply bulk- and surface-passivation agents for efficient and stable perovskite solar cells Joule 3 1963-8587
12345678910