Electrochemical recovery of rhenium from W–Re alloys in the form of perrhenic acid: I. Fundamentals of the process

被引：16

作者：

Levin A.M. ^{[1
]}

Levchuk O.M. ^{[1
]}

机构：

[1] Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences, Leninskii pr. 49, Moscow

来源：

Russian Metallurgy (Metally) | 2017年 / 2017卷 / 01期

关键词：

anodic dissolution; electrodialysis; perrhenic acid; potassium perrhenate; rhenium; tungsten; wastes; W–Re alloy;

D O I：

10.1134/S0036029517010074

中图分类号：

学科分类号：

摘要：

Linear voltammetry is used to study the anodic behavior of a VR20 alloy in sodium hydroxide solutions, and the possibility of high-rate dc electrochemical dissolution of this alloy is shown. Experimental dependences of the rate of alloy dissolution and the anode current efficiency on the anode current density are determined, and the electric power consumed for alloy dissolution under optimum conditions is determined in large-scale tests. Potassium perrhenate is removed from the formed electrolyte as an intermediate product to form perrhenic acid. The main characteristics of the electrodialysis conversion of the synthesized potassium perrhenate into perrhenic acid with a concentration of 591 g/L electrolyte are determined. A technological scheme is proposed for the recovery of rhenium from the wastes of a W–Re alloy in the form of perrhenic acid. © 2017, Pleiades Publishing, Ltd.

引用

页码：47 / 53

页数：6

共 25 条

[1]

Palant A.A., Troshkina I.D., Chekmarev A.M., Kostylev A.I., Technology of Rhenium, (2015)

[2]

Bykhovskii L.Z., Tigunov L.P., Strategic mineral raw materials: ways of solving the problem of deficiency, Mineral. Res. Rossii. Ekonomika Upravl., 5, pp. 43-49, (2015)

[3]

Agapova L.Y., Abisheva Z.S., Kilibaeva S.K., Altenova A.N., Ruzakhunova G.S., Sapukov I.A., Combined processing of technical tungsten–rhenium-containing wastes, Proceedings of Conference on Advanced Methods of Beneficiation and Combined Processing of Natural and Technical Mineral Raw Materials, pp. 361-363, (2014)

[4]

Elemesov T.B., Chernyshova O.V., Shakirova D.T., Drobot D.V., Dzhumaev P.S., Electrochemical dissolution of tungsten–rhenium-containing alloys, Tonkie Khim. Tekhn., 10, 2, pp. 53-60, (2015)

[5]

Palant A.A., Bryukvin V.A., Levin A.M., Levchuk O.M., Electrochemical processing of the metallic wastes of nonferrous and rare metals, Proceedings of Conference on 75th Anniversary of Baikov Institute of Metallurgy and Materials Science, pp. 176-182, (2013)

[6]

Guro V.P., Belov A.A., Repeated removal of ammonium perrhenate and the recovery of rhenium from the wastes of rhenium-containing alloys, Proceedings of Conference on Resource-Recycling, Low- Waste, and Nature-Saving Technologies of Land Reclamation, pp. 165-166, (2012)

[7]

Petrushin N.V., Ospennikova O.G., Elyutin E.S., Rhenium in single-crystal nickel superalloys for gas turbine engine blades, Aviats. Mater. Tekhn., S5, pp. 5-16, (2014)

[8]

Cheng T., Xiong N., Peng K., Yang H., Yin J., Technology of production and application of rhenium and its alloys, Rare Metal Mater. Eng., 38, 2, pp. 373-376, (2009)

[9]

Singh Gaur R.P., Wolfe T.A., Braymiller S.A., Recycling of rhenium-containing wire scrap?, Intern. J. Refract. Metals Hard Mater., 50, pp. 79-85, (2015)

[10]

Fleischmann E., Miller M.K., Affeldt E., Glatzel U., Quantitative experimental determination of the solid solution hardening potential of rhenium, tungsten and molybdenum in single-crystal nickelbased superalloys, Acta Materialia, 87, 1, pp. 350-356, (2015)

← 1 2 3 →