Behavior of concrete-filled double skin steel tubular columns with octagon section under axial compression

被引：16

作者：

Yang J. ^{[1
]}

Xu H. ^{[2
]}

Peng G. ^{[1
]}

机构：

[1] College of Civil Engineering and Architecture, Zhejiang University of Technology

[2] Zhejiang College of Construction

来源：

Frontiers of Architecture and Civil Engineering in China | 2008年 / 2卷 / 3期

关键词：

Axial compression; Bearing capacity; Double skin; Octagon section; Stress-strain relationship;

D O I：

10.1007/s11709-008-0035-5

中图分类号：

学科分类号：

摘要：

Based on some conclusions of two kinds of concrete-filled double skin steel tube (CFDSST) members with circular or square sections, a new kind of CFDSST with octagonal section, where the outer tube has an octagonal section and the inner tube has a circular section, is proposed in this paper. Behaviors of the CFDSST members with octagon section subjected to axial compression are investigated, and some curves of load-strain of steel tubes and confined concrete and the bearing capacity of members are obtained. It is indicated that the bearing capacity of the columns with octagonal section is larger than that with square section and is smaller than that with circular section, and the bearing capacity of members is related to the ratio of the straight side to the bevelled one. Based on the proper stress-strain relationship, a couple of numerical analyses are made using the finite element software named ANSYS. Finally, a simplified formula is proposed in the paper, and the numerical results agree well with the experimental results and the mathematical solutions. The results are valuable for engineers. © 2008 Higher Education Press and Springer-Verlag GmbH.

引用

页码：205 / 210

页数：5

共 16 条

[11]

Liu W., Han L., Investigation in some problems of behaviors of concrete-filled steel tubes subject axial local compression by ABAQUS method, Journal of Harbin University of Technology, 37, pp. 157-160, (2005)

[12]

Han L., Concrete Filled Steel Tubular Structures from Theory to Practice, (2004)

[13]

Roederc W., Cameron B., Composite action in concrete filled tubes, Journal of Structural Engineering, 125, pp. 477-484, (1999)

[14]

Baltay P., Gjelsvik A., Coefficient of friction for steel on concrete at high normal stress, Journal of Materials in Civil Engineering, 2, pp. 46-49, (1920)

[15]

Morishta Y., Tomii M., Yoshimura K., Experimental studies on bond strength in concrete filled square and octagonal steel tubular columns subjected to axial loads, Transactions of Japan Concrete Institute, pp. 359-336, (1979)

[16]

Zhong S., Concrete Filled Steel Tubular Structure, (2003)

← 1 2 →