A study on the circumferential groove effects on the minimum oil film thickness in engine bearings

被引：0
|
作者：
Myung-Rae Cho
Hung-Ju Shin
Dong-Chul Han
机构：
[1] Seoul National University,Turbo & Power Machinery Research Center
[2] Seoul National University,Graduate School
[3] Seoul National Univ,Mechanical Design & Production Engineering
来源：
KSME International Journal | 2000年 / 14卷
关键词：
Groove; Minimum Oil Film Thickness; Engine Bearing; Mobility Method;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
This paper presents the effects of circumferential groove on the minimum oil film thickness in engine bearings. The fluid film pressures are calculated by using the infinitely short bearing theory for the convenience of analysis. Journal locus analysis is performed by using the mobility method. A comparison of minimum oil film thickness of grooved and ungrooved bearing is presented. It is found that circumferential 360° groove only reduces the absolute magnitude of the oil film thickness, but 180° half groove affects the shape of film thickness curve and position of minimum oil film thickness.
引用
收藏
页码：737 / 743
页数：6
相关论文
共 50 条
  • [21] Analysis of Oil Film Thickness at Radial Sliding Bearings.
    Repcic, Nedzad
    1600, (25):
  • [22] The measurement of oil film thickness in ball bearings using ultrasound
    Zhang, J
    Drinkwater, BW
    Dwyer-Joyce, RS
    REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOLS 25A AND 25B, 2006, 820 : 1794 - 1801
  • [23] TRANSDUCERS FOR PRESSURE, TEMPERATURE AND OIL FILM THICKNESS MEASUREMENT IN BEARINGS
    SAFA, MMA
    ANDERSON, JC
    LEATHER, JA
    SENSORS AND ACTUATORS, 1983, 3 (02): : 119 - 128
  • [24] Experimental Investigation of Oil Film Thickness for Hydrodynamic Journal Bearings
    Navthar, Ravindra R.
    Halegowda, N. V.
    MECHANICAL AND AEROSPACE ENGINEERING, PTS 1-7, 2012, 110-116 : 2377 - +
  • [25] Experimental and numerical investigation on thermodynamic performance of full-floating ring bearings with circumferential oil groove
    Zhang, Congcong
    Men, Rixiu
    Wang, Yongliang
    He, Hong
    Chen, Wei
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2019, 233 (08) : 1182 - 1196
  • [26] Analysis of Oil Film Characteristics of Two-Axial Groove Sleeve Bearings
    Wang, Li-li
    Wei, Yu-liang
    Yuan, Guo-teng
    Zhao, Xing-tang
    Geng, Huan
    MATERIALS PERFORMANCE AND CHARACTERIZATION, 2018, 7 (05) : 1151 - 1163
  • [27] Study of static fluid forces in a squeeze film damper with a circumferential groove
    Zhang, J.X.
    Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 1995, 209 (04) : 263 - 274
  • [28] Effects of oil film thickness and viscosity on the performance of misaligned journal bearings with couple stress lubricants
    Zheng, Liangyan
    Zhu, Hanhua
    Zhu, Junchao
    Deng, Yibin
    TRIBOLOGY INTERNATIONAL, 2020, 146
  • [29] A rapid method of numerical calculation for oil film temperature in engine bearings
    Ashihara, Katsuhiro
    Hashimoto, Hiromu
    PROCEEDINGS OF THE ASME/STLE INTERNATIONAL JOINT TRIBOLOGY CONFERENCE, PTS A AND B, 2008, : 257 - 259
  • [30] Experimental study on oil film thickness of main bearings in multi-cylinder ic engines
    Wang, Gang-Zhi
    Shu, Ge-Qun
    Liang, Xing-Yu
    Neiranji Gongcheng/Chinese Internal Combustion Engine Engineering, 2008, 29 (04): : 76 - 80
12345