Microstructure and mechanical properties of in situ (Ti, Nb)Cp/Fe-based laser composite coating prepared with different heat inputs

被引：0
作者：
Qing-Tang Li
Yong-Ping Lei
Han-Guang Fu
Zhong-Wei Wu
Jian Lin
机构：
[1] Beijing University of Technology,School of Materials Science and Engineering
来源：
Rare Metals | 2018年 / 37卷
关键词：
Laser parameters; (Ti, Nb)C particle; Distribution characteristic; Laser coating; Mechanical property;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
In this paper, in situ (Ti, Nb)C particle ((Ti, Nb)Cp) reinforced Fe-based composite coatings were produced by laser cladding on the surface of the high carbon steel. The effects of heat input on the microstructure, distribution characteristics of particle, and mechanical properties of the coating were investigated. The results show that (Ti, Nb)C multiple carbide particle is synthesized during solidification of molten pool. The size of particle coarsens gradually, the area ratio of particle increases, and the amount of particles presents a non-monotonous variation with the increase in energy density. The mechanical properties of the coating are improved dramatically compared with those of the substrate, benefiting from its higher hardness and dispersed in situ (Ti, Nb)Cp in it. With the change in heat input, the mechanical performances of the coating vary except the hardness. When energy density is 1 × 105 J·mm−2, tensile strength and wear resistance of the coating achieve optimal value due to moderate content and size of the particle in the coating.
引用
收藏
页码：852 / 858
页数：6
相关论文
共 86 条
[1]  
Wang XH(2005)Microstructure and properties of the TiC/Fe-based alloy hardfacing layers J Mater Sci 40 3629-undefined
[2]  
Zou ZD(2003)Microstructural characteristics of laser clad coatings with rare earth metal elements J Mater Process Technol 139 448-undefined
[3]  
Qu SY(2005)Nanoscale TiB precipitates in laser deposited Ti-matrix composites Scripta Mater 53 1433-undefined
[4]  
Song SL(2013)Laser coating of aluminum alloy EN AW 6082-T651 with TiB Appl Surf Sci 282 914-undefined
[5]  
Wang KL(2010) and TiC: microstructure and mechanical properties J Alloys Compd 503 145-undefined
[6]  
Zhang QB(2013)In situ reaction synthesis of Ti–TiB composites containing high volume fraction of TiB by spark plasma sintering process Rare Met 32 52-undefined
[7]  
Sun ML(2010)Formation of carbonitride precipitates in hardfacing alloy with niobium addition Surf Coat Technol 205 2007-undefined
[8]  
Wei XG(2012)Effect of laser cladding process parameters on clad quality and in situ formed microstructure of Fe–TiC composite coatings Surf Coat Technol 206 4021-undefined
[9]  
Banerjee R(1997)Effect of heat input on the microstructure of in situ synthesized TiN–TiB/Ti based composite coating by laser cladding J Mater Process Technol 63 590-undefined
[10]  
Genc A(2008)Parametric studies of laser cladding processes Mater Lett 62 3947-undefined
123456789