Anti-plane pull-out of a rigid line inclusion from an elastic medium

被引：0
作者：
Yansong Wang
Baolin Wang
Youjiang Cui
Kaifa Wang
机构：
[1] Harbin Institute of Technology,Harbin Institute of Technology Shenzhen Campus
来源：
Applied Mathematics and Mechanics | 2023年 / 44卷
关键词：
pull-out; rigid line inclusion; anti-plane; stress intensity factor (SIF); stress singularity; O343.4; 74A40;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The transient and static anti-plane problem of a rigid line inclusion pulled out from an elastic medium is studied. The singular integral equation method is used to solve the stress field. Under the static load, the stress intensity factor (SIF) at the inclusion tips increases with the medium length. The problem becomes equivalent to an inclusion in a medium with an infinite length when the length of the medium is 3.5 times longer than that of the inclusion. However, under the transient load, the maximum value of the SIF occurs when the medium length is about two times the inclusion length. Besides, the relation between the pull-out force and the anti-plane displacement is given. The conclusions are useful in guiding the design of fiber reinforced composite materials.
引用
收藏
页码：809 / 822
页数：13
相关论文
共 89 条
[1]  
Mandell J F(1980)A microdebonding test for in situ assessment of fibre/matrix bond strength in composite materials International Journal of Adhesion & Adhesives 1 40-44
[2]  
Chen J H(1996)Interface toughness in fibre composites by the fragmentation test Composites Part A: Applied Science and Manufacturing 27 769-773
[3]  
Mcgarry F J(1992)Modeling of critical fiber length and interfacial debonding in the fragmentation testing of polymer composites Composites Science and Technology 43 379-387
[4]  
Detassis M(1987)A microbond method for determination of the shear-strength of a fiber-resin interface Composites Science and Technology 28 17-32
[5]  
Frydman E(1985)The interface between glass and carbon-fibers and thermosetting polymers Polymer Composites 6 242-248
[6]  
Vrieling D(2016)Pull-out behaviour and interface critical parameters of polyolefin fibres embedded in mortar and self-compacting concrete matrixes Construction and Building Materials 112 607-622
[7]  
Zhou X F(2017)Short-term and creep pull-out behavior of polypropylene macrofibers at varying embedded lengths and angles from a concrete matrix Construction and Building Materials 147 858-864
[8]  
Wagner H D(2009)Characterising the time-dependant behaviour on the single fibre level of SHCC: Part 2: the rate effects on fibre pull-out tests Cement and Concrete Research 39 787-797
[9]  
Nairn J A(2015)Pull-out behavior of steel fiber embedded in flowable RPC and ordinary mortar Construction and Building Materials 75 255-265
[10]  
Lacroix T(2015)Predicting pull-out behaviour based on the bond mechanism of arch-type steel fibre in cementitious composite Composite Structures 134 633-644
123456789