The effect of secondary phase on corrosion behaviors of the titanium–zirconium–molybdenum alloy

被引：0
作者：
Song-Wei Ge
Ping Hu
Jie Deng
Shi-Lei Li
Hai-Rui Xing
Jia-Yu Han
Xing-Jiang Hua
Li Wang
Jun-Zhou Yang
Bo Jin
Wen Zhang
Kuai-She Wang
机构：
[1] Xi’an University of Architecture and Technology,School of Metallurgy Engineering
[2] National and Local Joint Engineering Research Center for Functional Materials Processing,undefined
[3] Xi’an University of Architecture and Technology,undefined
[4] Western Xinxing Rare and Precious Metals Co.,undefined
[5] Ltd.,undefined
[6] Northwest Institute for Non-Ferrous Metal Research,undefined
来源：
Tungsten | 2024年 / 6卷
关键词：
Secondary phase; Electrochemical corrosion; Titanium–zirconium–molybdenum (TZM); Galvanic corrosion; Corrosion resistance;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
As the range of applications for molybdenum and its alloys has expanded, the corrosive environment for molybdenum alloys has become more demanding. In the past, the content of doping elements has been studied to investigate their influence on the corrosion performance of titanium–zirconium–molybdenum (TZM) alloys. In this paper, it is considered that the second phase in the alloy is the main factor affecting the corrosion performance of TZM alloys. By comparing the corrosion behavior of molybdenum metal and TZM alloy, the effect of the secondary phase on corrosion behaviors of TZM alloy has been investigated. The results show that the second phase reduces the corrosion resistance of the TZM alloy. The potential of the second phase is 73.7 mV higher than that of the Mo matrix, which contributes to the formation of microscopic electric couples. Under the action of microscopic electric couples, pitting corrosion is preferentially formed at the interface between the second phase and the matrix, which accelerates the corrosion of the matrix. This paper provides a theoretical basis for the application of TZM alloys in corrosive environments.
引用
收藏
页码：342 / 354
页数：12
相关论文
共 159 条
  • [1] Perepezko J(2009)The hotter the engine, the better Science 326 1068-undefined
  • [2] Primig S(2010)On the recrystallization behavior of technically pure molybdenum Int J Refract Metal Hard Mater 28 703-undefined
  • [3] Leitner H(2006)The mechanical properties and fracture mechanisms of wrought low carbon arc cast (LCAC), molybdenum-0.5pct titanium-0.1pct zirconium (TZM), and oxide dispersion strengthened (ODS) molybdenum flat products Mater Sci Eng A. 418 120-undefined
  • [4] Clemens H(2003)Modular He-cooled divertor for power plant application Fusion Eng Des 66–68 383-undefined
  • [5] Lorich A(1995)Suppression of carbon monoxide formation in oxide-coated TZM molybdenum X-Ray rotating anodes Int J Refract Metal Hard Mater 13 327-undefined
  • [6] Knabl W(2018)Application of molybdenum and molybdenum alloy in nuclear reactors China Molybdenum Industry 42 6-undefined
  • [7] Stickler R(2018)Research progress of strengthening and toughening modes and mechanism of molybdenum alloy J Funct Mater 49 1026-undefined
  • [8] Cockeram B(2013)Effect of trace TiC/ZrC on property and microstructure of TZM alloy at room and high temperature Rare Metal Mater Eng 42 853-undefined
  • [9] Diegele E(2009)Effect of alloying elements Ti, Zr on the property and microstructure of molybdenum Int J Refract Metal Hard Mater 27 78-undefined
  • [10] Krussmann R(2017)Corrosion behavior in acid and alkaline medium of TZM alloy Rare Metal Mater Eng 46 3961-undefined
12345678910