Cellular solids studied by x-ray tomography and finite element modeling–a review

被引：0
作者：
Clémence Petit
Sylvain Meille
Eric Maire
机构：
[1] INSA de Lyon,
[2] MATEIS CNRS UMR5510,undefined
[3] Université de Lyon,undefined
来源：
Journal of Materials Research | 2013年 / 28卷
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
This article reviews the use of x-ray computed tomography (XRCT) to investigate the structure and properties of cellular solids. In the first section, the possibilities offered by XRCT are presented. Examples of tomographic images are shown for the three classes of material (polymers, metals, and ceramics). Different characterizations of cellular solids performed thanks to XRCT images are shown: calculation of morphological parameters, in situ and ex situ mechanical tests, and use of the tomographic images to perform finite element (FE) modeling. The second part of the paper presents the existing methods to create the meshes from tomographic images and highlights some interesting results from the FE simulations.
引用
收藏
页码：2191 / 2201
页数：10
相关论文
共 209 条
[1]  
Buffière JY(2010)In situ experiments with x ray tomography: An attractive tool for experimental mechanics Exp. Mech. 50 289-undefined
[2]  
Maire E(2008)Recent advances in x-ray microtomography applied to materials Int. Mater. Rev. 53 129-undefined
[3]  
Adrien J(2009)Numerical simulations of mechanical properties of cellular materials using computing tomography analysis J. Cell. Plast. 45 441-undefined
[4]  
Masse JP(2005)Finite element modeling of the actual structure of cellular material determined by X-ray tomography Acta Mater. 53 719-undefined
[5]  
Boller E(2007)Polymeric foam under dynamic loading by the use of the microtomographic technique J. Mater. Sci. 42 7202-undefined
[6]  
Stock SR(2011)In situ 3D X-ray microtomography study comparing auxetic and non-auxetic polymeric foams under tension Phys. Status Solidi B 45 248-undefined
[7]  
Fischer F(2012)Impact of material processing and deformation on cell morphology and mechanical behavior of polyurethane and nickel foams Int. J. Solids Struct. 49 2714-undefined
[8]  
Lim GT(2007)Characterisation of the morphology of cellular ceramics by 3D image processing of X-ray tomography J. Eur. Ceram. Soc. 27 1973-undefined
[9]  
Handge UA(2003)Preceramic polymer derived cellular ceramics Compos. Sci. Technol. 63 2361-undefined
[10]  
Altstdt V(2012)Mechanical properties of porous ceramics in compression: On the transition between elastic, brittle, and cellular behavior J. Eur. Ceram. Soc. 32 3959-undefined
12345678910