Numerical analysis of high-efficiency lead-free perovskite solar cell with NiO as hole transport material and PCBM as electron transport material

被引:18
作者
T. R. Lenka
A. C. Soibam
K. Dey
T. Maung
F. Lin
机构
[1] National Institute of Technology Silchar,Microelectronics and VLSI Design Group, Department of Electronics and Communication Engineering
[2] University of Cambridge,Cavendish Laboratory, Department of Physics
[3] National University of Singapore,Solar Energy Research Institute of Singapore
[4] National University of Singapore,Department of Electrical and Computer Engineering
关键词
Lead free perovskite; NiO; PCBM; Solar cell; SCAPS;
D O I
10.1007/s40012-020-00291-7
中图分类号
学科分类号
摘要
In this work a lead free perovskite solar cell structure is proposed with NiO as the hole transport material (HTM), CH3NH3SnI3 as the perovskite absorber material and PCBM (phenyl C61 butyric acid methyl ester) as the electron transport material (ETM). Numerical analysis of the designed solar cell is performed using Solar Cell Capacitance Simulator (SCAPS-1D) program. The power conversion efficiency (PCE) of the optimized device stack is found to be above 29% with Voc = 0.98 V, Jsc = 34.86 mA/cm2, FF = 85.64%. The lead free perovskite solar cell with different HTM and ETM may be investigated for high PCE.
引用
收藏
页码:111 / 116
页数:5
相关论文
共 50 条
  • [41] Numerical Investigation of RbGeI3-Based Lead-Free Perovskite Solar Cell with Various Cu-Based Hole Transport Layers Using SCAPS-1D
    Dharmender
    Nigam, Kaushal Kumar
    Yadav, Piyush
    Kuksal, Shrija
    Parashar, Tushar
    Chauhan, Sudakar Singh
    JOURNAL OF ELECTRONIC MATERIALS, 2025,
  • [43] Replacing the electron-hole transport layer with doping: SCAPS simulation of lead-free germanium-based perovskite solar cells based on CsGeI3
    Lu, Junhua
    Chen, Shuo
    Wang, Hairong
    Qiu, Long
    Wu, Chenyu
    Qian, Wencan
    Wang, Zhijie
    Huang, Kai
    Wu, Jiang
    Chen, Huan
    Gao, Yuxing
    SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2024, 271
  • [44] Gallium oxide as an electron transport, a window, an UV and a hole blocking layer for high performance perovskite solar cell: a simulation study
    Barkat, Sarra
    Meftah, Afak
    Labed, Madani
    Laiadi, Widad
    Abdallaoui, Maroua
    Meftah, Amjad
    Sengouga, Nouredine
    Rim, You Seung
    OPTICAL AND QUANTUM ELECTRONICS, 2024, 56 (02)
  • [45] Solution-Processable Ionic Liquid as an Independent or Modifying Electron Transport Layer for High-Efficiency Perovskite Solar Cells
    Wu, Qiliang
    Zhou, Weiran
    Liu, Qing
    Zhou, Pengcheng
    Chen, Tao
    Lu, Yalin
    Qiao, Qiquan
    Yang, Shangfeng
    ACS APPLIED MATERIALS & INTERFACES, 2016, 8 (50) : 34464 - 34473
  • [46] Numerical Simulation of Lead-Free Tin and Germanium Based All Perovskite Tandem Solar Cell
    En, Rae -Ann Lim Jia
    Azhari, Ayu Wazira
    Halin, Dewi Suriyani Che
    Sepeai, Suhaila
    Ludin, Norasikin Ahmad
    INTERNATIONAL JOURNAL OF NANOELECTRONICS AND MATERIALS, 2023, 16 : 183 - 193
  • [47] Simulation Study of an Antimony Selenide Solar Cell with Graphene Oxide as Hole Transport Material
    Kumari, Raman
    Mamta, Rahul
    Kumar, Rahul
    Singh, Vidya Nand
    ACS APPLIED ELECTRONIC MATERIALS, 2023, 5 (07) : 3949 - 3956
  • [48] Design and analysis of lead-free perovskite-CZTSSe based tandem solar cell
    Shivani Gohri
    Jaya Madan
    Rahul Pandey
    Rajnish Sharma
    Optical and Quantum Electronics, 2023, 55
  • [49] Design and analysis of lead-free perovskite-CZTSSe based tandem solar cell
    Gohri, Shivani
    Madan, Jaya
    Pandey, Rahul
    Sharma, Rajnish
    OPTICAL AND QUANTUM ELECTRONICS, 2023, 55 (02)
  • [50] Design and simulation of high efficiency lead-free heterostructure perovskite solar cell using SCAPS-1D
    Yasin, S.
    Zoubi, T. Al
    Moustafa, M.
    OPTIK, 2021, 229